ZyXEL Communications G-1000 manual Authentication Required WPA-PSK

G-1000 User’s Guide

Figure 22 Wireless LAN: 802.1x/WPA for WPA Protocol

The following table describes the labels not previously discussed

Table 18 Wireless LAN: 802.1x/WPA for WPA Protocol

LABEL	DESCRIPTIONS
Key Management	Choose WPA in this field.
Protocol
WPA Group Key	The WPA Group Key Update Timer is the rate at which the AP (if using WPA-
Update Timer	PSK key management) or RADIUS server (if using WPA key management) sends
	a new group key out to all clients. The re-keying process is the WPA equivalent of
	automatically changing the WEP key for an AP and all stations in a WLAN on a
	periodic basis. Setting of the WPA Group Key Update Timer is also supported in
	WPA-PSK mode. The G-1000 default is 1800 seconds (30 minutes).
Authentication	This field is disabled.
Databases
Apply	Click Apply to save your changes back to the G-1000.
Reset	Click Reset to begin configuring this screen afresh.

Please see Table 17 for information on the additional fields shown in this screen.

6.7.3 Authentication Required: WPA-PSK

Select Authentication Required in the Wireless Port Control field and WPA-PSKin the Key Management Protocol field to display the next screen.

Chapter 6 Wireless LAN 65