ZyXEL Communications SNMP Configuration, Ch A P T E R, G-1000 User’s Guide, Field, Description

Models: G-1000

1 192
Download 192 pages 21.42 Kb
Page 110
Image 110
SNMP Configuration

G-1000 User’s Guide

CH A P T E R 15

SNMP Configuration

This chapter shows you how to use SMT to configure SNMP on the G-1000.

To configure SNMP, select option 22 from the main menu to open Menu 22 – SNMP Configuration as shown next. The “community” for Get, Set and Trap fields is SNMP terminology for password.

Figure 62 Menu 22 SNMP Configuration

Menu 22 - SNMP Configuration

SNMP:

Get Community= public

Set Community= public

Trusted Host= 0.0.0.0

Trap:

Community= public

Destination= 0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

The following table describes the SNMP configuration parameters.

Table 47 Menu 22 SNMP Configuration

FIELD

DESCRIPTION

 

 

SNMP:

 

 

 

Get Community

Type the Get Community, which is the password for the incoming Get- and

 

GetNext requests from the management station.

Set Community

Type the Set Community, which is the password for incoming Set requests from

 

the management station.

Trusted Host

If you enter a trusted host, your G-1000 will only respond to SNMP messages from

 

this address. A blank (default) field means your G-1000 will respond to all SNMP

 

messages it receives, regardless of source.

Trap:

 

 

 

Community

Type the trap community, which is the password sent with each trap to the SNMP

 

manager.

Destination

Type the IP address of the station to send your SNMP traps to.

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

110

Chapter 15 SNMP Configuration

Page 110
Image 110
ZyXEL Communications manual Ch A P T E R, G-1000 User’s Guide, Menu 22 SNMP Configuration, Field, Description