G-1000 User’s Guide

3Enter command “sys stdio 0” to disable the SMT timeout, so the TFTP transfer will not be interrupted. Enter command “sys stdio 5” to restore the five-minute SMT timeout (default) when the file transfer is complete.

4Launch the TFTP client on your computer and connect to the G-1000. Set the transfer mode to binary before starting data transfer.

5Use the TFTP client (see the example below) to transfer files between the G-1000 and the computer. The file name for the configuration file is rom-0(rom-zero, not capital o).

Note that the telnet connection must be active and the SMT in CI mode before and during the TFTP transfer. For details on TFTP commands (see following example), please consult the documentation of your TFTP client program. For UNIX, use “get” to transfer from the G-1000 to the computer and “binary” to set binary transfer mode.

18.2.4 Example: TFTP Command

The following is an example TFTP command:

TFTP [-i] host get rom-0 config.rom

where “i” specifies binary image transfer mode (use this mode when transferring binary files), “host” is the G-1000 IP address, “get” transfers the file source on the G-1000 (rom-0 name of the configuration file on the G-1000) to the file destination on the computer and renames it config.rom.

The following table describes some of the fields that you may see in third party TFTP clients.

Table 55 General Commands for Third Party TFTP Clients

COMMAND

DESCRIPTION

 

 

Host

Enter the IP address of the G-1000. 192.168.1.2 is the G-1000’s default IP

 

address when shipped.

Send/Fetch

Use “Send” to upload the file to the G-1000 and “Fetch” to back up the file on

 

your computer.

Local File

Enter the path and name of the firmware file (*.bin extension) or configuration

 

file (*.rom extension) on your computer.

Remote File

This is the filename on the G-1000. The filename for the firmware is “ras” and

 

for the configuration file, is “rom-0”.

Binary

Transfer the file in binary mode.

 

 

Abort

Stop transfer of the file.

 

 

18.2.5 Backup Via Console Port

Note: The console port is internal and reserved for technician use only.

Back up configuration via console port by following the HyperTerminal procedure shown next. Procedures using other serial communications programs should be similar.

128

Chapter 18 Firmware and Configuration File Maintenance

Page 127 Page 129
Page 128
Image 128
ZyXEL Communications G-1000 Example Tftp Command, Backup Via Console Port, General Commands for Third Party Tftp Clients
Page 127 Page 129

G-1000 specifications

ZyXEL Communications G-1000 is a versatile network device that has gained attention in the realm of home and small office networking solutions. This device is a powerful gateway that seamlessly integrates various communication technologies, making it a reliable choice for users looking for enhanced connectivity, speed, and network management features.

One of the main features of the ZyXEL G-1000 is its dual-band wireless capability, which supports both 2.4 GHz and 5 GHz frequency bands. This allows users to connect multiple devices simultaneously without experiencing bandwidth congestion. The dual-band functionality enables smoother streaming, faster downloads, and better online gaming experiences, as users can choose the best band based on their device capabilities and distance from the router.

The G-1000 also incorporates advanced Wi-Fi 6 (802.11ax) technology, which significantly improves wireless performance compared to previous generations. Wi-Fi 6 offers enhanced data rates, improved efficiency, increased capacity for handling multiple devices, and better performance in crowded areas. This makes the ZyXEL G-1000 an ideal choice for households with numerous smart devices, such as smartphones, tablets, smart TVs, and home automation systems.

In terms of security, the ZyXEL G-1000 is equipped with robust security features that protect users from various cyber threats. The device supports WPA3 encryption, which offers stronger protection against unauthorized access and enhances overall network security. Additionally, advanced firewall features and parental controls allow users to manage access to the internet and protect their networks further.

Another notable characteristic of the G-1000 is its intuitive web interface and mobile app, which simplify network management. Users can easily monitor connected devices, set up guest networks, and modify network settings, all from a user-friendly dashboard. This level of accessibility ensures that even those with limited technical knowledge can effectively manage their home networking environment.

The ZyXEL G-1000 also boasts multiple Ethernet ports, providing the flexibility to connect wired devices for stable and high-speed connections. This is particularly advantageous for devices that require consistent bandwidth, such as gaming consoles and desktop computers.

In conclusion, ZyXEL Communications G-1000 stands out as a feature-rich networking solution that combines the latest technologies, robust security measures, and user-friendly management. Its advanced capabilities make it suitable for various networking needs, whether for home use or in small office environments. With its commitment to quality and innovation, ZyXEL continues to provide reliable solutions that enhance connectivity and user experience.
Top Page Image Contents