ZyXEL Communications G-1000 manual Configuring Log Settings, View Log

G-1000 User’s Guide

Figure 34 View Log

The following table describes the labels in this screen.

Table 31 View Log

LABEL	DESCRIPTION
Display	Select a log category from the drop down list box to display logs within the
	selected category. To view all logs, select All Logs.
	The number of categories shown in the drop down list box depends on the
	selection in the Log Settings page.
Email Log Now	Click Email Log Now to send the log screen to the e-mail address specified in
	the Log Settings page.
Refresh	Click Refresh to renew the log screen.
Clear Log	Click Clear Log to clear all the logs.
Time	This field displays the time the log was recorded.
Message	This field states the reason for the log.
Source	This field lists the source IP address and the port number of the incoming
	packet.
Destination	This field lists the destination IP address and the port number of the incoming
	packet.
Notes	This field displays additional information about the log entry.

9.2 Configuring Log Settings

To change your G-1000’s log settings, click the LOGS links under ADVANCED and then the Log Settings tab. The screen appears as shown.

Use the Log Settings screen to configure to where the G-1000 is to send the logs; the schedule for when the G-1000 is to send the logs and which logs and/or immediate alerts the G-1000 is to send.

Chapter 9 Log Screens 83