Manuals / ZyXEL Communications / Computer Equipment / Network Card

ZyXEL Communications G-1000 Configuring Roaming, Enter 5 to display Menu 3.5 - Wireless LAN Setup

Models: G-1000

1 192

Download 192 pages 21.42 Kb

Page 105

Table 44 Menu 3.5.1 WLAN MAC Address Filter

G-1000 User’s Guide

The following table describes the fields in this menu.

Table 44 Menu 3.5.1 WLAN MAC Address Filter

FIELD	DESCRIPTION

Active	To enable MAC address filtering, press [SPACE BAR] to select Yes and press [ENTER].

Filter Action	Define the filter action for the list of MAC addresses in the MAC address filter table.
	To deny access to the G-1000, press [SPACE BAR] to select Deny Association and press
	[ENTER]. MAC addresses not listed will be allowed to access the router.
	The default action, Allowed Association, permits association with the G-1000. MAC
	addresses not listed will be denied access to the router.
MAC Address Filter

1..32	Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers that are
	allowed or denied access to the G-1000 in these address fields.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

13.3.2 Configuring Roaming

Enable the roaming feature if you have two or more G-1000s on the same subnet. Follow the steps below to allow roaming on your G-1000.

1From the main menu, enter 3 to display Menu 3 – LAN Setup.

2Enter 5 to display Menu 3.5 – Wireless LAN Setup.

Figure 58 Menu 3.5 Wireless LAN Setup

	Menu 3.5 - Wireless LAN Setup
Name (SSID)= ZyXEL		Edit MAC Address Filter= No
Hide Name (SSID)= No		Edit MAC Address Filter= No
Channel	ID= CH06 2437MHz	Edit Roaming Configuration= Yes
RTS Threshold= 2432		Block Intra-BSS Traffic= No
Frag. Threshold= 2432		Preamble= Long
WEP Encryption= Disable		802.11 Mode= Mixed
Default Key= N/A		Max. Frame Burst= 0
Key1=	N/A	Breathing LED= Yes
Key2=	N/A
Key3=	N/A
Key4=	N/A

Authen. Method= N/A

Press ENTER to Confirm or ESC to Cancel:

3Move the cursor to the Edit Roaming Configuration field. Press [SPACE BAR] to select Yes and then press [ENTER]. Menu 3.5.2 – Roaming Configuration displays as shown next.

Chapter 13 LAN Setup

105

Image 105

ZyXEL Communications Configuring Roaming, Enter 5 to display Menu 3.5 - Wireless LAN Setup, G-1000 User’s Guide, Field

Contents

802.11g Wireless Access Point G-1000User’s Guide Copyright DisclaimerTrademarks Information for Canadian Users Federal Communications Commission FCC Interference StatementCertifications Safety Warnings ZyXEL Limited Warranty Product model and serial number Warranty Information Customer SupportBrief description of the problem and the steps you took to solve it Date that you received your deviceCustomer Support G-1000 User’s GuideCustomer Support G-1000 User’s GuideSafety Warnings Table of ContentsZyXEL Limited Warranty CopyrightG-1000 User’s Guide Remote Management Screens Wireless LANChapter ChapterGeneral Setup MaintenanceChapter ChapterSystem Password Appendix B List of Figures Figure 6 The MAIN MENU Screen of the Web ConfiguratorG-1000 User’s Guide Figure 37 System Status Show Statistics Figure 80 Menu 24 System Maintenance G-1000 User’s Guide G-1000 User’s Guide List of TablesTable 37 Restore Configuration Table 80 Subnet G-1000 User’s Guide Preface About This Users GuideRelated Documentation User Guide Feedback Syntax ConventionsGraphics Icons Key 1.2.1 Physical Features 1.2 G-1000 Features1.2.1.3 Reset Button Getting to Know Your G-10001.2.2.2 Wi-Fi Protected Access 1.2.2 Firmware Features1.2.2.3 802.11b Wireless LAN Standard 1.2.1.4 G-1000 LED1.2.2.7 Brute-Force Password Guessing Protection 1.2.2.4 802.11g Wireless LAN Standard1.2.2.8 Wireless LAN MAC Address Filtering 1.2.2.5 STP Spanning Tree Protocol / RSTP Rapid STP1.3 Applications for the G-1000 1.2.2.15 Wireless Association List1.2.2.10 IEEE 802.1x Network Security 1.2.2.11 SNMP1.3.2 Corporation Network Application 1.3.1 Internet Access ApplicationChapter 1 Getting to Know Your G-1000 G-1000 User’s GuideHardware Installation and Initial Setup 2.1 Front Panel of the G-1000CH A P T E R Chapter 2 Hardware Installation and Initial Setup 2.2 Top Panel and Connections of the G-1000G-1000 User’s Guide Table 3 Front Panel LED Description COLOR2.2.2 Power Port 2.2.3 The RESET Button2.2.1 One 10/100M Ethernet Port 2.5 Configuring Your G-1000 2.4 Additional Installation Requirements2.3 Hardware Mounting Options 2.2.4 AntennasIntroducing the Web Configurator 3.1 Accessing the G-1000 Web ConfiguratorCH A P T E R 3.2.1 Procedure To Use The Reset Button 3.2 Resetting the G-10003.2.2 Method of Restoring Factory-Defaults 3.3 Navigating the G-1000 Web ConfiguratorClick LOGOUT at any time to exit the web configurator 4.1 Wizard Setup Overview Wizard Setup4.1.1 Channel 4.1.2 ESS ID4.3 Wizard Setup Wireless LAN 4.2 Wizard Setup General SetupFigure 7 Wizard 1 General Setup Table 5 Wizard 1 General Setupwireless card inserted in the G-1000 Note This field is only available when you have an externalFigure 8 Wizard 2 Wireless LAN Setup Table 6 Wizard 2 Wireless LAN Setup4.4 Wizard Setup IP Address 4.4.1 IP Address Assignment4.4.2 IP Address and Subnet Mask the new IP address if you want to access the web configurator by the DHCP server to access the G-1000 againNote You must know the IP address assigned to the G-1000 Note If you changed the G-1000s IP address, you must useClick Finish to proceed to complete the Wizard setup 4.5 Basic Setup CompleteBack Finish Click Back to return to the previous screenSystem Screens 5.2 Configuring General Setup5.1 System Overview Figure 11 System General Setup5.3 Configuring Password Figure 12 PasswordTable 10 Password Figure 13 Time Setting 5.4 Configuring Time SettingTable 11 Time Setting G-1000 User’s GuideG-1000 User’s Guide Table 11 Time SettingChapter 5 System Screens LABEL6.2 Wireless Security Overview Wireless LAN6.2.2 Authentication 6.1 Introduction6.2.3 Restricted Access 6.2.5 Configuring Wireless LAN on the G-10006.2.4 Hide G-1000 Identity 6.3.1 WEP Encryption 6.3 Configuring the Wireless Screento the wireless LAN and you change the G-1000’s ESSID or WEP Note If you are configuring the G-1000 from a computer connectedsettings, you will lose your wireless connection when you press Apply to confirm. You must then change the wireless settings of yourChapter 6 Wireless LAN Table 13 WirelessG-1000 User’s Guide LABEL6.4 Configuring Roaming 6.4.1 Requirements for Roaming 6.5 MAC Filter Note All APs on the same subnet and the wireless stations musthave the same ESSID to allow roaming G-1000 User’s Guide Chapter 6 Wireless LANFigure 17 MAC Address Filter Table 15 MAC Address Filter6.6.1 WPA2-PSK Application Example 6.6 Introduction to WPA6.6.2 WPA2 with RADIUS Application Example 6.6.3 Wireless Client WPA Supplicants 6.7 Configuring IEEE 802.1x and WPA6.7.1 Authentication Required server, the reauthentication timer on the RADIUS server has Note If wireless station authentication is done using a RADIUSFigure 21 Wireless LAN 802.1x/WPA for 802.1x Protocol Table 17 Wireless LAN 802.1x/WPA for 802.1x ProtocolTable 17 Wireless LAN 802.1x/WPA for 802.1x Protocol 6.7.2 Authentication Required WPAChapter 6 Wireless LAN G-1000 User’s Guide6.7.3 Authentication Required WPA-PSK Figure 23 Wireless LAN 802.1x/WPA for WPA-PSK Protocol 6.7.4 Authentication Required WPA2Table 19 Wireless LAN 802.1x/WPA for WPA-PSK Protocol Chapter 6 Wireless LAN6.7.5 Authentication Required WPA2-PSK 6.8 Configuring RADIUS G-1000 User’s Guide Chapter 6 Wireless LANFigure 26 RADIUS Screen Table 22 RADIUS Screen7.1 TCP/IP Parameters IP Screen7.1.1 IP Address and Subnet Mask 7.1.2 WAN IP Address Assignmentby the DHCP server to access the G-1000 again 7.2 Configuring IPnew IP address if you want to access the web configurator Figure 27 IP Setup8.1 Remote Management Overview Remote Management Screens8.1.1 Remote Management Limitations CH A P T E R8.2 Configuring WWW 8.1.3 System Timeout8.1.2 Remote Management and NAT 8.4 Configuring TELNET 8.3 Configuring Telnet8.5 Configuring FTP Note SNMP is only available if TCP/IP is configured 8.6 SNMPGet - Allows the manager to retrieve an object variable from the agent 8.6.2 SNMP Traps 8.6.1 Supported MIBsG-1000 User’s Guide Table 28 SNMP Traps8.6.3 SNMP Interface Index 8.6.4 Configuring SNMPSNMP Configuration enet0Table 30 Remote Management SNMP G-1000 User’s GuideChapter 8 Remote Management Screens LABELChapter 8 Remote Management Screens G-1000 User’s Guide9.1 Configuring View Log Log ScreensCH A P T E R 9.2 Configuring Log Settings Figure 34 View LogTable 31 View Log Table 32 Log Settings Figure 35 Log SettingsG-1000 User’s Guide Chapter 9 Log ScreensG-1000 User’s Guide Table 32 Log SettingsChapter 9 Log Screens LABEL10.1 Maintenance Overview Maintenance10.2 System Status Screen CH A P T E R10.2.1 System Statistics 10.3 Association ListChapter 10 Maintenance 10.4 F/W Upload ScreenG-1000 User’s Guide Figure 38 Association ListNote Do not turn off the G-1000 while firmware upload is in progress Figure 39 Firmware UploadFigure 40 Firmware Upload In Process 10.5 Configuration Screen Figure 42 Firmware Upload ErrorFigure 41 Network Temporarily Disconnected 10.5.1 Backup Configuration 10.5.2 Restore ConfigurationFigure 43 Configuration Figure 45 Network Temporarily Disconnected Figure 44 Configuration Upload Successful10.6 Restart Screen 10.5.3 Back to Factory Defaults11.2 Changing the System Password 11.1 Connect to your G-1000 Using TelnetIntroducing the SMT CH A P T E RFigure 50 Menu 23.1 System Security Change Password 11.3 G-1000 SMT Menus OverviewTable 39 Main Menu Commands 11.4 Navigating the SMT InterfaceG-1000 User’s Guide Table 38 SMT Menus Overview continued Chapter 11 Introducing the SMTG-1000 User’s Guide Table 39 Main Menu CommandsFigure 51 G-1000 SMT Main Menu Table 40 Main Menu SummaryCH A P T E R General SetupChapter 12 General Setup Table 41 Menu 1 General SetupG-1000 User’s Guide FIELD13.1 LAN Setup LAN Setup13.2 TCP/IP Ethernet Setup CH A P T E RFigure 54 Menu 3.2 TCP/IP Setup 13.3 Wireless LAN SetupTable 43 Menu 3.5 Wireless LAN Setup G-1000 User’s Guide Figure 55 Menu 3.5 Wireless LAN SetupChapter 13 LAN Setup FIELDTable 43 Menu 3.5 Wireless LAN Setup 13.3.1 Configuring MAC Address FilterChapter 13 LAN Setup ConfigurationFigure 56 Menu 3.5 Wireless LAN Setup 2 Enter 5 to display Menu 3.5 - Wireless LAN SetupChapter 13 LAN Setup ENTER. Menu 3.5.1 - WLAN MAC Address Filter displays as shown next2 Enter 5 to display Menu 3.5 - Wireless LAN Setup 13.3.2 Configuring RoamingFigure 58 Menu 3.5 Wireless LAN Setup Chapter 13 LAN SetupTable 45 Menu 3.5.4 Bridge Link Configuration Figure 59 WLAN Roaming ConfigurationChapter 13 LAN Setup G-1000 User’s GuideG-1000 User’s Guide Chapter 13 LAN SetupCH A P T E R Dial-in User SetupG-1000 User’s Guide Chapter 14 Dial-in User SetupFigure 61 Menu 14.1- Edit Dial-in User Table 46 Menu 14.1- Edit Dial-in UserFigure 62 Menu 22 SNMP Configuration SNMP ConfigurationTable 47 Menu 22 SNMP Configuration Chapter 15 SNMP ConfigurationG-1000 User’s Guide Chapter 15 SNMP Configuration16.2 Configuring External RADIUS Server 16.1 System PasswordSystem Security CH A P T E RTable 48 Menu 23.2 System Security RADIUS Server G-1000 User’s Guide Figure 65 Menu 23.2 System Security RADIUS ServerChapter 16 System Security FIELD2 Enter 4 to display Menu 23.4 - System Security - IEEE802.1x 16.3G-1000 User’s Guide Figure 67 Menu 23.4 System Security IEEE802.1x Required or No Access AllowedTable 49 Menu 23.4 System Security IEEE802.1x Chapter 16 System SecurityWhen you configure Key Management Protocol to WPA, the Authentication configure Data Privacy for Broadcast/Multicast packets fieldG-1000 User’s Guide Table 49 Menu 23.4 System Security IEEE802.1xChapter 16 System Security G-1000 User’s GuideSystem Information and Diagnosis 17.1 System StatusCH A P T E R 1 Enter 24 to display Menu 24 - System Maintenance 17.2 System InformationFigure 69 Menu 24.1 System Maintenance Status Table 50 Menu 24.1 System Maintenance StatusTable 51 Menu 24.2.1 System Maintenance Information 17.2.1 System InformationMenu 1 - General Setup G-1000 User’s Guide17.2.2 Console Port Speed 17.3 DiagnosticFollow the procedure next to get to display this menu Chapter 17 System Information and Diagnosis G-1000 User’s GuideFirmware and Configuration File Maintenance 18.1 Filename ConventionsCH A P T E R 18.2.1 Backup Configuration Using FTP 18.2 Backup Configuration18.2.2 Using the FTP command from the DOS Prompt Figure 75 FTP Session Example 18.2.3 Backup Configuration Using TFTP18.2.5 Backup Via Console Port 18.2.4 Example TFTP Command1 Display menu 24.5 and enter “y” at the following screen System Maintenance and Information 19.1 Command Interpreter ModeCH A P T E R 19.2 Time and Date Setting Figure 80 Menu 24 System MaintenanceFigure 81 Valid CI Commands Table 56 System Maintenance Time and Date Setting Figure 82 Menu 24.10 System Maintenance Time and Date SettingChapter 19 System Maintenance and Information G-1000 User’s Guide19.3.4 Remote Management Setup 19.3 Remote Management Setup19.3.1 Telnet 19.3.2 FTPChapter 19 System Maintenance and Information 19.3.5 Remote Management LimitationsLAN only , WAN only , All or Disable . The default is LAN only G-1000 User’s Guide19.4 Remote Management and NAT 19.5 System TimeoutProblems Starting Up the G-1000 TroubleshootingProblems with the Ethernet Interface Appendix AProblems with Telnet Problems with the PasswordProblems with the WLAN Interface Table 61 Troubleshooting the PasswordAppendix B SpecificationsHardware FirmwareG-1000 User’s Guide Table 65 Firmware continued SpecificationsBrute-Force Password Guessing Protection Appendix CExample G-1000 User’s Guide Brute-Force Password Guessing ProtectionWindows 95/98/Me Appendix D Setting up Your Computer’s IP AddressInstalling Components Configuring Windows 2000/NT/XP Verifying Settings3 Right-click Local Area Connection and then click Properties Setting up Your Computer’s IP AddressG-1000 User’s Guide Figure 88 Windows XP Start MenuPage In the IP Settings tab, in IP addresses, click Add Verifying Settings Macintosh OS 8/91 Click Start, All Programs, Accessories and then Command Prompt 8 Click OK to close the Internet Protocol TCP/IP Properties window2 Select Ethernet built-in from the Connect via list Setting up Your Computer’s IP AddressG-1000 User’s Guide Figure 94 Macintosh OS 8/9 Apple MenuVerifying Settings Macintosh OS5 Close the TCP/IP Control Panel Select Built-in Ethernet from the Show listVerifying Settings G-1000 User’s Guide Setting up Your Computer’s IP AddressCase A The G-1000 is using the same LAN and WAN IP addresses Appendix EIP Address Assignment Conflicts G-1000 User’s Guide Figure 99 IP Address Conflicts Case B Case D Two or more subscribers have the same IP addressFigure 100 IP Address Conflicts Case C IP Address Assignment ConflictsG-1000 User’s Guide In this case, the subscribers are not able to access the InternetFigure 101 IP Address Conflicts Case D IP Address Assignment ConflictsIP Address Assignment Conflicts G-1000 User’s GuideWireless LAN Topologies Wireless LANsAd-hoc Wireless LAN Configuration Appendix FPage RTS/CTS ChannelWireless LANs G-1000 User’s Guide Figure 104 Infrastructure WLANFigure 105 RTS/CTS Fragmentation ThresholdPreamble Type IEEE 802.11g Wireless LANIEEE RADIUSTypes of RADIUS Messages EAP-MD5 Message-Digest Algorithm Types of AuthenticationEAP-TLS Transport Layer Security EAP-TTLS Tunneled Transport Layer ServicePEAP Protected EAP LEAPEncryption WPA2Security Parameters Summary User AuthenticationWireless LANs Table 69 Wireless Security Relational Matrix continuedAUTHENTICATION ENABLE IEEEG-1000 User’s Guide Wireless LANsIP Subnetting Appendix GIP Addressing IP ClassesSubnetting Subnet MasksSUBNET MASK IP ADDRESS Example Two SubnetsSUBNET MASK “1” BITS LAST OCTET BIT VALUETable 76 Subnet Table 75 SubnetTable 77 Subnet Example Four SubnetsTable 78 Subnet Table 79 SubnetExample Eight Subnets Subnetting With Class A and Class B Networks IP Subnetting G-1000 User’s GuideCommand Syntax Command InterpreterCommand Usage Appendix HG-1000 User’s Guide Command InterpreterLog Descriptions AppendixTable 84 System Maintenance Logs G-1000 User’s GuideConfiguring What You Want the G-1000 to Log Log CommandsG-1000 User’s Guide Table 85 ICMP Notes continued Table 86 Sys logDisplaying Logs Log Command ExampleTable 87 Log Categories and Available Settings G-1000 User’s GuideLog Descriptions G-1000 User’s GuideAppendix J Antenna CharacteristicsAntenna Selection and Positioning Recommendation Types of Antennas For WLANPositioning Antennas Connector TypeAppendix K Power Adaptor SpecificationsPower Adaptor Specifications G-1000 User’s GuideG-1000 User’s Guide Table 93 AUSTRALIA AND NEW ZEALAND PLUG STANDARDS Power Adaptor SpecificationsNumerics IndexZyAIR G-3000 User’s Guide FTP 72, 75, 134 Restrictions ZyAIR G-3000 User’s GuideZyAIR G-3000 User’s Guide ZyAIR G-3000 User’s Guide ZyAIR G-3000 User’s Guide