ZyXEL Communications manual Navigating the G-1000 Web Configurator

Models: G-1000

1 192
Download 192 pages 21.42 Kb
Page 38
Image 38
3.2.2Method of Restoring Factory-Defaults

G-1000 User’s Guide

5Release the RESET button and wait for the G-1000 to finish restarting.

3.2.2Method of Restoring Factory-Defaults

You can erase the current configuration and restore factory defaults in three ways:

Use the RESET button on the side panel of the G-1000 to upload the default configuration file (hold this button in for about 10 seconds or until the SYS LED, LINK LED or BDG/RPT LED turns red). Use this method for cases when the password or IP address of the G-1000 is not known.

Use the web configurator to restore defaults (refer to Chapter 10).

Transfer the configuration file to your G-1000 using FTP. See later in the part on SMT configuration for more information.

3.3 Navigating the G-1000 Web Configurator

The following summarizes how to navigate the web configurator from the MAIN MENU screen.

Note: Follow the instructions you see in the MAIN MENU screen or click the 3.3 Navigating the G-1000 Web ConfiguratorManual background icon (located in the top right corner of most screens) to view online help.

Note: The Manual backgroundManual background icon does not appear in the MAIN MENU screen.

Figure 6 The MAIN MENU Screen of the Web Configurator

Click WIZARD SETUP for initial configuration including general setup, Wireless LAN setup and IP address assignment.

38

Chapter 3 Introducing the Web Configurator

Page 38
Image 38
ZyXEL Communications manual Navigating the G-1000 Web Configurator, Method of Restoring Factory-Defaults