TRANSCEIVER PROGRAMMING
3-6
November 1999
Part No. 001-7780-500
3.3.7 HELP MENU
Contents - Displays the help system table of c ontents.
Search For Help On - Displays the search dialog box
that allows searching for a help topic by keyword.
About PCTrunk - Displays thesoftware version
number of PCTrunk and the address of the E.F.
Johnson Company.
3.4 RADIO-WIDE PARAMETER SCREENS
3.4.1 INTRODUCTION
The radio-wide screens program the par ameters
that are the same for all systems, channels, and zones.
Separate screens are used forGeneral, Conventional,
SMARTNET/SmartZone, and PortableOptions
parameters. Refer to theinformation which follows.
3.4.2 RADIO-WIDE GENERAL SCREEN
Band
Displays the operating bandselected by the Radio
TypeMenu (see Section 3.3.2). The selected oper-
ating band must match that of theradi o being
programmed. Currently,only 800 MHz 77xx models
are available.
Zones
TotalZones - The total number of zones currently set
up. The maximum number allowed is 16. Zones are
added by clicking the Add button(see following).
Current Zone - Indicates the currentlyselected zone.
To selectanother zone, click the up/down arrows.
Zone Alias - Edits the unique alpha identification fo r
thedisplayed zone. Up to 8 characters can be entered.
The zone alias is briefly displayedwhenever a new
zone is selected. Refer to Section1.2.4 for more
information on zones.
Add (Zones) Button - Adds another zone.
Delete (Zones) Button - Deletes the last zone added.
Defaults
Home Zone - Selects the zone that is selected b y the
Home Zone option switch if programmed.
Backlight On Time - Selects the length oftime that
the backlight stays on after any key or theBacklight
option switch is pressed (see“Options” which fol-
lows and Section 2.3.3).
Options
Backlight Key Press - If checked, the backlight turns
on for the “BacklightOn Time” above whenever any
front panel key is pressed (see Section 2.3.3).
Battery Saver - If checked, low transmit power is
automaticallyselected when the RSSI level indicates
that the site is nearby (see Section 2.3.6).
Keypad Lockout- If checked, all front panel keys are
disabledand are not available to the user (see Section
2.3.5).
Power-Up On Home Zone - If checked, the home
zone is always selected at power-up.
Beeps - If checked, alltones are enabled. Otherwise,
no tones sound (see Section 2.3.10).