TRANSCEIVER PROGRAMMING
3-18
November 1999
Part No. 001-7780-500
Announcement Groups Screen
This screen programs the announcementgroups
that are used to communicate with several talk groups
simultaneously.There can be up to 3 announcement
groups per system, and each announcementgroup can
have up to 15 talk groups.
Tocreate an announcement group, click the “Add
AG” button and the “Add TGs to the AG” screen
shown above is displayed. Enter the announcement
group ID, click the talk groupsto select/de-select those
that are to be included, and then create the announce-
ment group by clicking the “Create AG” button.To
delete the current announcement group, click the
“Delete AG” button.
To editan announcement group, click the
“Modify List” button on the rightand the preceding
screen is displayed. Select theannouncement group to
be edited from a pull-down menuselecting by clicking
the “AG” arrow. Then clickthe talk groups to select/
de-select them and then clickthe “Update List” button
to make the changes.
Control Channels Screen
This screen allows the system manager to view
and edit the control channels. Each SMARTNET
system can have up to four control channels, and each
SmartZone system can have up to 32 controlchannels.
Only one control channel is active at a time.
To editthis list, click the Control Channels tab
and then the “Modify List” button on the right side.
The following information is thenprogrammed in the
dialog box that is displayed:
Control Channel - Selects the control channel to be
edited. Toadd a new channel, click the “New Entry”
button.
Frequency - The transmit and receivefrequency of
the control channel. These are themobile frequen-
cies, not the repeater frequencie s. Only multiples of
5kHzand6.25kHzarevalid.With800MHzfre-
quencies, a receive frequency 45MHz above the
transmit frequency is automatica lly entered.
New Entry Button - Click this button to display the
dialog box used to add another controlchannel.