EFJohnson 7780 SMARTNET/SMARTZONE System Other ID’S Screen, Phone Interconnect, Private Call

TRANSCEIVER PROGRAMMING

3.6.3SMARTNET/SMARTZONE SYSTEM OTHER ID’S SCREEN

The SMARTNET/SmartZone Other ID’s screen is shown above, and it programs the following parameters.

Individual ID - Uniquely identifies the radio on a par- ticular system. Each radio must have a different Unit ID. Valid Unit IDs are from 1-49152.

Connect Tone - The tone expected by the controller on the traffic channel to verify that a subscriber trans- mission is occurring. This tone should be set the same as it is in the controller.

3.6.4SMARTNET/SMARTZONE SYSTEM PHONE INTERCONNECT SCREEN

The SMARTNET/SmartZone Phone Intercon- nect screen is shown above, and the parameters it programs are as follows:

Phone Interconnect

Refer to Section 2.5.6 for more information on telephone calls.

Disabled - Telephone calls cannot be placed or received.

Answer Only - Telephone calls can be received but not placed.

List Only - Telephone calls can be placed and received, and numbers can be recalled from memory only.

Unlimited - Telephone calls can be placed and received, and numbers can be recalled from memory or dialed using the front panel keypad (full keypad 15-key models only).

Private Call

Same as above, but for private (unit-to-unit) calls. Refer to Sections 2.5.4 and 2.5.5 for more information.

Private Call II

Programs either standard (Private Conversation II™) or enhanced (Enhanced Private Conversation™) private calls as follows:

Standard - The user does not receive any feedback when the called radio is not active in the system. Only a “No Answer” is received if the called radio does not answer.

Enhanced - When a call is placed, the system tells the user if the called radio is currently active in the sys- tem and within range. The calling radio displays “NO ACK” if the called radio is not active in the system and “NO ANSWR” if it is active but does not answer.

Phone DTMF Timing

Initial Delay - Delay from 50-500 milliseconds from when a traffic channel is granted for phone intercon- nect to the start of the dialing out of the phone number.

Digit Duration - Duration from 50-500 milliseconds of each phone number digit.

Inter-Digit Delay - Delay from 50-500 milliseconds between each digit of a phone number.

	November 1999
3-15	Part No. 001-7780-500