2-1 November 1999
Part No. 001-7780-500
TRANSCEIVER OPERATION
SECTION 2 TRANSCEIVER OPERATION
2.1 FEATURES
2.1.1 GENERAL FEATURES
•16 zones with home zone select
•16 channels per zone (256 channelstotal)
•Radio-wide scan
•Time-out timer
•LCD 8-character alphanumeric displaywith 12
status annunciators
2.1.2 CONVENTIONAL FEATURES
•Channel scan with three user programmable scan
lists
•Priority channel sampling
•Busy channel lockout (transmit disable on busy)
•Monitor mode
•Call Guard® (CTCSS/DCS) squelch control
•Penalty timer
•Conversation timer
•Repeater talk-around
•DTMF/ANI signaling
•User selectable power output
•Selectable channel display mode
2.1.3 SMARTNET™ II FEATURES
•Group, Enhanced Private Conversation™, Private
Conversation II™, and telephone calls
•Call Alert™ (paging)
•Emergency calls
•Messaging
•Priority monitor scanning
•Failsoft operation
•Dynamic regrouping
2.1.4 SMARTZONE® FEATURES
•Site trunking
•Site search
•Site lock/unlock
2.1.5 LIMITED/ENHANCED KEYPAD
FEATURES
Limited (3-key) and Enhanced (15-key) models
of this transceiver areavailable. Most features avail-
able with the enhanced keypad model are also avail-
able with the limited keypad model. The features not
available with the limited (3-key) model are as
follows:
•Since the DTMF keys are not available, it is not
possible to dial telephone numbers or manually
send DTMF tones. However, telephone calls can
still be placed using prestorednumbers.
•Withconventional standard scanning, only one scan
list is available and it isnot user programmable.
•With SMARTNET/SmartZoneoperation, direct
entry of unit ID numbers is not available when
making private calls or sending pages. However,
these calls can still be made by recalling the ID fro m
a prestored list.
2.2 CONTROLS AND DISPLAY
2.2.1 TOP PANELCONTROLS
On-Off Volume - Turning thisknob clockwise turns
power on and sets the volume level.Turning it coun-
terclockwise to the detent turns power off.
Channel Select Switch - Selectsupto16prepro-
grammed channels. The selected channelis also indi-
catedinthedisplay.
Antenna Jack - Connection point for the antenna.
BATT
RX
TX
OFF/VOL
6
7
8
5
4
3
2
1
12
1110 9
16
15
14
13
Transmitter
Keyed Receive Signal
Detected Low
Battery
On-Off/Volume
Antenna Jack
Channel Select Sw