TRANSCEIVER PROGRAMMING
3-20
November 1999
Part No. 001-7780-500
4. Repeat the preceding steps forthe other scan lists if
applicable.
Status Aliasing Screen
This screen is shown above, and it programs the
alias for each of up to eight status conditionsthat can
be sent. The meaning of each status number is defined
by the system manager.Refer to Section 2.5.9 for
more information.
To editthis list, click the Status Aliasing tab and
then the “Modify List” button on the right side. The
following information is then programmed in the
dialog box that is displayed:
Status Numb er -Thescrollbarstotherightofthis
box select the status number that is to be edited.
Status Alia s -Programs up to 8 characters that iden-
tify the status. This identification is display ed when
the user selects a statuscondition.
3.6.8 SETTING UP SMARTNET/SMART-
ZONE CHANNELS
The SMARTNET/SmartZone Channelscreen
shown in Figure 3-4 is displayedw henthe
SMARTNET or SmartZonec hanneltype is selected.
This screen programs unique channel parameters and
also assigns channels to the selectable zonesdisplayed
by the transceiver.
The general procedure for setting up a
SMARTNET/SmartZone channelis as follows. Refer
to the descriptions which follow this procedure fo r
information on SMARTNET/SmartZoneChannel
screen parameters.
1. Make sure that the desiredzone is selected in the
Zone box.
2. Select the channel number in the Channels Index
box which is to be programmed with the channel.
3. To set upa SMARTNET channel, select
“SMARTNET” asthe channel type, and to set up a
SmartZone channel, select “SmartZone”.
4. Click the Modify button to display the dialog box
shown in the lower part of Figure 3-4. This box
programs the alias (tag) that is displayed when it is
selected.
5. Program the otherparameters in the main part of the
screen (see informationwhich follows).
3.6.9 SMARTNET/SMARTZONE CHANNEL
SCREEN PARAMETERS
The following parameters are programmed in t he
SMARTNET/SmartZone channel screenshown in
Figure 3-4.
Selected Channel
Zone Box - Clickingt he arrow to the right of thisbox
displaysthe available zones. Click on a zone to select
it. Zones and zone aliases areset up on the Radio-
Wide General screen described in Section 3.4.2.
Channel Index Box - Displays the channels in the
selected zone. The channeltype is selected by the
Channel Type box belowit.
- Displays the screenshown in the lower
part of Figure 3-4. The parameters programmed in
this screen are as follows:
Channel - Selects the channel to be edited.
Alias - Programs the identificationthat is displayed
when the channel is selected.Up to 8
characters can be programmed.
Transmit - Not programmable becausethe t ransmit
frequency is dynamicallyassigned over the
air (“Trunked” isalways displayed).
Receive - Dynamically assigned likethe transmit
frequency.