User management
69
Use the following procedure to configure information (user name, password, operation level, etc.) about recorder users.
Up to 32 users can be registered.
1Click the [User mng.] button on the setup menu.
2On the sub-menu that appears, click [User].
This will display the "User Settings" window.
3Configure the settings for each item.
Refer to “User setups” table for details about the settings.
4Click the [Registration] button.
5If you want to configure settings for more users, repeat
steps 3 and 4.
6To complete user registration, click the [Set] button.

User setups

♦Initial default

Users

Item Settings Description
User name Name input
(Blank♦)
Enters the user name.
• Enter between 5 and 14 single-byte alphanumeric
characters.
Password Enter password
(Blank♦)
Enters the password.
• Enter between 5 and 8 single-byte alphanumeric characters.
• Use a password that is not easily guessable by another
person. Also, take care that you do not forget the password.
• To ensure security, change passwords periodically.
Level LV1♦ / LV2 / LV3 / LV4 Specifies the user level.
• For operations that can be performed at each level, refer to
"User level (page 73)".
Access priority 1♦ to 16 Specifies the priority sequence for operations when multiple
users are logged in on the recorder at the same time.
Default screen [Cam.1]♦ to [Cam.64] / [Cam.1-4]
/ [Cam.5-8] / to / [Cam.61-64] /
[Seq]
Specifies the live image display immediately after log in.
• Selecting [Cam.1] to [Cam.64] displays the images of the
selected cameras on a 1-image screen.
• Selecting [Cam.1-4] to [Cam.61-64] displays the live images
of the selected cameras on a 4-image screen.
• Selecting [Seq] displays images in a specified sequence.
Camera partitioning [View/Operate]♦ / [View] / [--] Specifies the scope of control for each camera channel.
• When [View/Operate] is selected, live/recorded image
display or camera operation can be performed.
• When [View] is selected, live/recorded image display can be
performed, but camera operation cannot.
• When [--] is selected, neither live/recorded image display nor
camera operation can be performed.
Important:
• You must click press the [Set] button to activate settings on the recorder when registering, editing, or deleting users.