Configuring disks
83
1 Click the [Config.] button on the setup menu.
This will display the administrator authentication window.
2Enter the "Administrator name" and "Password", and
then click the [OK] button.
This will display the configuration settings top window (Disk
Information window).
3Check the items you want.
Refer to “Disk information” table for details about the window
items.
Disk partition information
Important:
• When the "Config" page is displayed, all operations (recording, playback, etc.) except disc configuration stop.
• Displaying the config window forcibly logs out any other users currently logged in to the main unit. Also installing or removing HDD or HDD
units from the front panel forcibly logs out any other users logged in to the main unit.
• To exit the disk config window, click the [Main] button. Clicking the [x] button in the upper right corner of the window may cause operation
troubles.