Quick settings
29
7Click the [OK] button.
This completes registration.
Note:
• When a camera you want to register is not detected or when you want to change the settings of a camera, refer to "NW camera (page 48)".
• Registering a camera forcibly logs out any other users currently logged in to the recorder.
• All recording is disabled while auto camera registration is in progress.
• Camera auto-registration is unavailable for cameras on a different subnet accessed through a router.
• For improved security, some camera models whose settings have been changed from initial defaults are detected for the only first 20
minutes after power is turned on. For details refer to the operating instructions for the camera.
• The compression format of registered cameras is set automatically to JPEG or M-JPEG.
Quick settings 3
♦Initial default
Important:
• Execute [Register the IP address automatically given by this unit to a detected camera] to automatically provide IP addresses to all
detected cameras. Note that some cameras may already be operating.
Item Settings Description
Port setup Camera port♦ / Client PC port Select the network port to which the camera being registered is
connected.
Camera auto-registration Register the IP address
automatically given by this unit to
a detected camera♦
/ Register the IP address set with
a detected camera
Specifies the IP address given to the detected camera by the
recorder.
• When [On] is selected for [DHCP] for the recorder [Network
setup], no IP address can be given to the camera.