Panasonic WJ-ND400 22, Getting Started

22
Installation an d Setup
Getting Started
The procedure to start operations is shown below.
Setup Procedure
1Rack Mounting Mount the recorder into the rack (page 23).
Go to step 2 if you are not using a rack.
2Connections Connect the recorder to the various devices (page 25).
3Power On Turn on the recorder (page 39).
When using extension units, turn on all extension units before turning on
the recorder.
4Installing HDDs Install the HDDs in the recorder (page 46).
Unformatted HDDs inserted into the recorder are automatically initialized.
Also, set the HDD operation mode as necessary (page 51).
5Recorder Network SettingsUse the buttons on the recorder's front panel to do the network settings
(refer to the Setup Instructions (PDF file)).
6PC Network SettingsChange the PC's network settings to match the recorder's settings (refer to
the Setup Instructions (PDF file)).
7Initialize HDDs To change HDD space management, display disk configuration and
initialize the HDD from the settings menu on the recorder as needed (refer
to the Setup Instructions (PDF file)).
8Camera Network Settings Open the PC settings menu from the PC and do the network settings (refer
to the Setup Instructions (PDF file)).
9Setup Set up the functions that you need (refer to the Setup Instructions (PDF
file)).
10 Start Operations
When necessary
Replace HDDs You can change or format HDDs while the recorder is [On] (page 46 to
page 53).
ND400_Basic.book 22 ページ ２００８年７月１０日 木曜日 午前１０時５０分