Playback
25
Search for images with motion on a specific time and date from
images recorded by cameras that support VMD search and view
them in a list. Select and playback images of a specified time and
date from the results list.
1Click the [Control] button.
2Select the camera showing the live image you want to
search for or playback.
3Click the [Search] button in the [Search] box.
This will display the [Select search method] window.
4Click the [VMD search] button.
The [VMD search] window is displayed.
Note:
• Live images are shown live and recorded images are shown
paused in the image area.
5Click the [V] button and set the date range and the basic
channel for the VMD search.
6Set the area for the motion search.
Specify the area by dragging the mouse on the area of the
image.
7Click the [OK] button.
Searching starts.
• This displays the search results on the rec event list
window.
• Searching may take a while.
8Click the recorded event time to playback.
The image at the selected recorded event time is played
back.
• Refer to page 20 for information about operations during
playback.
• Images are played back in 1-screen only. Click the
[Multiscreen select] button after playback has started to
display images in multiscreen.
9Click the [STOP] button.
Stops playback.
Search for and playback images with
motion at a specific time and date (VMD
search)
Important:
• To do a VMD search, the cameras that support VMD search
need to be set in advance.
Refer to the "readme.txt" file on the CD-ROM bundled with the
recorder for information about the camera models that support
VMD search.
For details refer to the operating instructions for the camera.
Important:
• In the list of VMD search results, the [Info] audio information
icon is not displayed even if audio is attached to the file.
• You cannot do VMD searches of SD memory or pre-event
recording data.