Schedules
45
Clicking the [Measurement] button displays a window that you can
use to confirm that the specified rates provide proper operation on
the network being used. A red rate setting value indicates that live
images or recording of the image may not be possible at the
specified rate.
Measurement takes about 90 seconds.
• When measurement results (total of all camera maximum
speeds) are greater than the recorder network speed, heavy
network traffic can cause dropping of recorded images, live
images, alarms, and other data, degraded operational response,
restarts, and other problems. (Guideline network speed: 128
Mbps)
• Even when measurement results do not exceed the above
guideline network speed, the number of connected cameras and
PCs can cause some of the phenomena described above.
Note:
• Other users connected to the recorder are logged out
automatically during measurement. They are logged back in
after measurement is complete.
• Measurement results are for reference only. They are subject to
change in accordance with the network environment.
• The target for measurement is the value after clicking [Set].
• Since the recorder uses a network, network traffic and other
factors can make it impossible to obtain live video and recorded
images as expected from the setup, slow browser response, or
broken connections. Also, recording may not be possible when
the recorder is in use or malfunctioning. We are not liable for
lost content.
About the [Measurement] button
Important:
• Network traffic volume fluctuates depending on the network
environment. Set a rate based on measurement results to
ensure enough margin for maximum network speed.
• Recording, playback, live video, a copying are all disabled
while measurement is in progress.