Network
63
♦Initial default
*1 Refer to "Recorder network settings (page 11)" for information on initial default settings.
Port forwarding
♦Initial default
Important:
• A different subnet should be set for each port.
• If DHCP is set to [On] and "SD Memory recording" is set, write requests to the camera's SD memory data may fail at startup. This occurs
because the response from the DHCP server is slow. Once the address has been obtained from the DHCP server, the error is resolved.
Item Settings Description
Port forwarding Off / On♦Specifies whether port forwarding is enabled.
Port number Port number input
(Camera 1:60001♦ to
camera 64:60064♦)
When port forwarding is [On], specifies camera port numbers in
the range of 1 to 65535.
• Do not specify any of the following numbers for an HTTP
port number, FTP port number, site alarm port number, or
port forwarding port number.
20, 21, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123, 161,
162, 546, 547, 995, 10001, 10002, 10003, 10004, 10005,
10006, 10007