Panasonic WJ-ND400 Rack mounting positions

Setting up the Rack
24
When connecting multiple extension units (WJ-HDE400) to the recorder, place the recorder in the center of the rack.
Connect the recorder and the extension unit with the connection cable (1 m {39.4 "}) included with the extension unit (page 31).
Note:
• Install the recorder in the center of the rack, if using a rack. If you install the recorder at the top or bottom of the rack, the cable may not be
long enough.
•When installing the recorder in the rack, leave a space of 1 unit (44 mm {1.73 "}) above and below each unit.
• Secure the connection cables to the extension unit using the cable clamp provided.
If the connection is poor, the system may become unstable and unable to record images.
• Keep the cables as short as possible. Looped cables or large distances between pieces of equipment may cause malfunctions. Do not wind
the cable in a coil.
• Refer to the Setup Instructions (PDF file) to check the unit numbers of connected extension units.
Rack mounting positions
Extension unit
(unit number 4)
Connection cable
(provided with extension unit)
Requires 1 Unit
Extension unit
(unit number 5)
Extension unit
(unit number 1)
Extension unit
(unit number 3)
Requires 1 Unit
Requires 1 Unit
Requires 1 Unit
Requires 1 Unit
Extension unit
(unit number 2)
Network Disk
Recorder
ND400_Basic.book 24 ページ ２００８年７月１０日 木曜日 午前１０時５０分