Extron electronic manual IP Setup Commands, IPL T CR48 Communication

Command/response table for SIS commands (continued)

Command ASCII (Telnet) URL Encoded (Web) Response

IP Setup Commands

IPL T CR48 • Communication

Set Unit name24

Set Unit name to factory default24 Read Unit name

 Set time/date24 Read time/date Set GMT offset24 Read GMT offset

Set daylight saving time Read daylight saving time Set DHCP on24

Set DHCP off24 View DHCP mode Set IP address24 Read IP address

Read hardware address (MAC) Set subnet mask

Read subnet mask

Set gateway IP address Read gateway IP address24 Set administrator password24 Clear administrator password24 Read administrator password24 Set user password24

E X1@ CN}	W X1@ CN		Ipn • X1@]
E • CN}	W %20 CN		Ipn • X4(]
E CN}	WCN		X1@]
E X1# CT}	W X1# CT		Ipt • X1#]
E CT}	WCT		X1#]
E X# CZ}	W X# CZ		Ipz X#]
E CZ}	WCZ		X#]
E X3$ CX}	W X3$ CZ		Ipx X3$]
E CX}	WCX		X3$]
E 1DH}	W1DH		Idh1]
E 0DH}	W0DH		Idh0]
E DH}	WDH		X%]
E X1$ CI}	W X1$ CI		Ipi • X1$]
E CI}	WCI		X1$]
E CH}	WCH		X1*]
EX1(  }	X1(	CS	X1(]
CS	W		Ips •
E CS}	WCS		X1(]
E X1$ CG}	W X1$ CG		Ipg • X1$]
E CG}	WCG		X1$]
E X3# CA}	W X3# CA		Ipa • X3#]
E • CA}	W %20 CA		Ipa • ]
E CA}	WCA		X3#]
E X3# CU}	W X3# CU		Ipu • X3#]

and Control 29

NOTE: X#  = Greenwich Mean Time (GMT) offset value (-12.0 to +14.0)

X%  = On/off status: 0 = off/disable; 1 = on/enable

X1@	= Name is a text string up to 24 characters drawn from the alphabet, digits, minus sign/hyphen. No blank or space characters are permitted.
X1#	= Set local date and time format (MM/DD/Y-HH:MM:SS); Read local date and time format (day of week, date month year HH:MM:SS)
X1$	= IP address
X1*	= Hardware (MAC) address
X1(  = Subnet mask
X3#	= Password: maximum length of 12 characters and no special characters
X3$	= Daylight saving time: 0 = off/ignore; 1 = on (use in northern hemisphere) (USA); 2 = on (Europe); 3 = on (Brazil)
X4(	= Default Name: combination of model name and last 3 pairs of MAC address.