Maintenance
81
Use the following procedure to save setup menu settings to the recorder and to load previously saved settings. This procedure also can be used
to return setup menu settings to their initial defaults.
1Click the [Maintenance] button on the setup menu.
2On the sub-menu that appears, click [Settings
management].
This will display the "Settings management" window.
3Click the button of the respective item to suit your
particular requirements.
• Each selected item is executed.
Refer to “Settings management” table for details about each
item.
Settings management
Settings management
Item Description
User setup save Saves user setup data to the recorder.
User setup load Loads user setup data saved on the recorder.
Reset to the default Initializes settings.
Important:
• Even if you perform [User setup load]/[Reset to the default], the following settings cannot be loaded or initialized.
⋅[NW link down detection]
⋅[Bandwidth control]
⋅[HTTP port number]
⋅[FTP port number]
⋅[Network settings]
⋅[DNS Settings]
• Even if you perform [User setup load]/[Reset to the default], the [Config.] - [Encryption] settings cannot be loaded or initialized.
• Performing [User setup load] sets host authentication to [Off].