Schedules
43
Program settings
Item Settings Description
Model Shows the model number of the selected camera.
Compression Shows the compression format of the recorded image.
• To change the compression format, refer to "NW camera
(page 48)".
Measurement
Max. network speed (Mbps) Shows the maximum bit rate on the network being used when
the [Measurement] button is clicked.
Max. bit rate (ips) Shows the maximum recording rate on the network being used
when the [Measurement] button is clicked.
• A red rate setting value indicates that live images or
recording of the image may not be possible at the specified
rate.
Recorder setup - Live video
Rate Off*1 / 1ips*2 / 2ips / 3ips / 5ips /
10ips / 15ips / All*3 / I-Frame
Specifies the live image rate of the camera image.
• Available settings differ according to the currently selected
compression format. Refer to "Checking and changing a
camera (Manually setting) (page 50)" for details about
compression method settings.
Audio Off*1*2*3 / On Specifies whether audio should be transmitted with live images.
• Audio and live video are sent at the same time. Audio cannot
be transmitted unless live images are transmitted.
• Audio transmitting can be selected only for a camera model
that supports audio transmitting.
Recorder setup
Manual rec. Off*1 / 0.1ips / 0.2ips / 0.3ips /
0.5ips / 1ips*2 / 2ips / 3ips / 5ips /
10ips / 15ips / All / I-Frame*3
Specifies the recording rate for manual recording.
Available settings differ according to the currently selected
compression format.
Schedule rec. Off*1*2*3 / 0.1ips / 0.2ips / 0.3ips /
0.5ips / 1ips / 2ips / 3ips / 5ips /
10ips / 15ips / All / I-Frame
Specifies the recording rate for schedule recording.
Available settings differ according to the currently selected
compression format.
Recorder setup - Event rec. - Pre-event
Rate Off*1*2*3 / 1ips / 2ips / 3ips / 5ips /
10ips / 15ips / All /
I-Frame
Specifies the rate of pre-event recording.
• Available settings differ according to the currently selected
compression format. Refer to "Checking and changing a
camera (Manually setting) (page 50)" for details about
compression method settings.
• [All] cannot be selected when [M-JPEG] is selected as the
compression format.
Duration 2s / 5s / 10s*1*2*3 / 20s / 30s / 1min /
3min / 5min / 10min / 15min
Specifies the time of pre-event recording.
• Pre-event recording on a camera channel for which a pre-
recording area has been made on the HDD is performed at
all times by the pre-recording area in the HDD. Refer to
"Pre-event recording area formatting (page 88)" for details
about pre-recording area.
• For guidelines on times in pre-event recording when the pre-
recording area has not been made on the HDD, refer to the
memo at page 44.
Recorder setup - Event rec. - Post-event
Rate Off*1*2*3 / 1ips / 2ips / 3ips / 5ips /
10ips / 15ips / All /
I-Frame
Specifies the rate of post-event recording.
• Available settings differ according to the currently selected
compression format. Refer to "Checking and changing a
camera (Manually setting) (page 50)" for details about
compression method settings.