
Error Messages
Introduction
Errors are retrieved in a first in first out (FIFO) order. If more than 30 errors occur, the error queue overflows and the last error in the queue is replaced with error
Once the errors are read they are removed from the error queue. This opens a position at the end of the queue for a new error message, if one is subsequently detected. When all errors have been read from the queue, further error queries return +0, “No errors”.
To delete all the errors in the queue from the front panel press:
•System , More , Inputs
Error List then
Clear Errors .
To delete all the errors in the queue remotely use:
•the *CLS (clear status) command.
The error queue is also cleared when the instrument power has been switched off.
HP E4419B User’s Guide |