HP Saw E4419B manual Channel Measurements

Meas

Setup

Power Meter Operation

Channel Measurements

Channel Measurements

Single channel measurements can be made on the currently selected

window by pressing , Input Select and selecting A or B . Absolute power is displayed for the selected channel in either dBm or Watts. The filter, range (where applicable), offset, duty cycle, calibration factor and limits can be set for the selected channel.

Single channel measurements can be displayed relative to a stored reference. In relative mode readings are displayed in either dB or %. Refer to “Making Relative Measurements”, on page 2-37 for further information.

2-52 HP E4419B User’s Guide