HP Saw E4419B manual System errorCh B Dty Cyc may impair accuracy with ECP, Found or unreadable

Error Messages

Error Messages

-310	System error;Ch B Dty Cyc may impair accuracy with ECP
	sensor
	This indicates that the sensor connected to channel B is for use with
	CW signals only.
-310	System error;Detector EEPROM Read Failed - critical data not
	found or unreadable
	This indicates a failure with your HP E-series power sensor. Refer to
	your power sensor manual for details on returning it for repair.
-310	System error;Detector EEPROM Read Completed OK but
	optional data block(s) not found or unreadable
	This indicates a failure with your HP E-series power sensor. Refer to
	your power sensor manual for details on returning it for repair.
-310	System error;Detector EEPROM Read Failed - unknown
	EEPROM table format
	This indicates a failure with your HP E-series power sensor. Refer to
	your power sensor manual for details on returning it for repair.
-310	System error;Detector EEPROM < > data not found or
	unreadable
	Where < > refers to the sensor data block covered, for example,
	Linearity, Temp - Comp (temperature compensation).
	This indicates a failure with your HP E-series power sensor. Refer to
	your power sensor manual for details on returning it for repair.
-310	System error;Option 001 Battery charger fault
	The power meter is connected to an ac power source, the battery is not
	fully charged and it is not charging.
-310	System error;Sensors connected to both front and rear inputs.
	You cannot connect two power sensors to the one channel input. In this
	instance the power meter detects power sensors connected to both it’s
	front and rear channel inputs.
-321	Out of memory
	The power meter required more memory than was available to run an
	internal operation.

4-10 HP E4419B User’s Guide