Power Meter Operation
Selecting a Digital or Analog Display
To select the format of the display in the currently selected window:
1. Press SetupMeas
,
Display Format .
2.Press Meter Dgtl Anlg to highlight the type of format you require. Pressing this key toggles between a digital and analog display.
To select the range of the analog display in the currently selected window:
1. Press SetupMeas
,
Display Format ,
Anlg Mtr Scaling .
2.The current setting of the maximum and minimum values displayed on the analog meter are displayed under the Max and Min softkeys respectively.
3.To change either of these settings press the appropriate softkey. The power meter displays the current value in a pop up window. Modify this value (see below) until the desired value is displayed.
■Use 
or 
to modify the digit on which the cursor is currently positioned.
■Use 
or 
to move to other digits.
4.The choices available depend on the unit of measurement selected and the current measurement mode. If the measurement unit selected is logarithmic, then the choice will be dB or dBm. If the measurement unit selected is linear, then choose the appropriate softkeys from the following menus:
More
%
Cancel
%
Increment
Multiplier
Decrement
Multiplier
Cancel
More
mW
μW
nW
Cancel
W
Increment
Multiplier
Decrement
Multiplier
Cancel
Pressing Increment Multiplier or
Decrement Multiplier increases or decreases the multiplier
HP E4419B User’s Guide |
