Error Messages

Error Messages

	Error Messages
-101	Invalid character
	An invalid character was found in the command string. You may have
	inserted a character such as #, $, or % in the command header or within
	a parameter.
	For example, LIM:LOW O#.
-102	Syntax error
	Invalid syntax was found in the command string.
	For example, LIM:CLE:AUTO, 1 or LIM:CLE: AUTO 1.
-103	Invalid separator
	An invalid separator was found in the command string. You may have
	used a comma instead of a colon, semicolon, or blank space; or you may
	have used a blank space instead of a comma.
	For example, OUTP:ROSC,1.
-105	GET not allowed
	A Group Execute Trigger (GET) is not allowed within a command string.
-108	Parameter not allowed
	More parameters were received than expected for the command. You
	may have entered an extra parameter, or added a parameter to a
	command that does not accept a parameter.
	For example, CAL 10.
-109	Missing parameter
	Fewer parameters were received than expected for the command. You
	omitted one or more parameters that are required for this command.
	For example, AVER:COUN.
-112	Program mnemonic too long
	A command header was received which contained more than the
	maximum 12 characters allowed.
	For example, SENSeAVERageCOUNt 8.

4-4	HP E4419B User’s Guide