HP Saw E4419B manual Character data not allowed, Invalid string data, String data not allowed

Error Messages

Error Messages

-148	Character data not allowed
	A discrete parameter was received but a character string or a numeric
	parameter was expected. Check the list of parameters to verify that you
	have used a valid parameter type.
	For example, MEM:CLE CUSTOM_1.

-151	Invalid string data
	An invalid string was received. Check to see if you have enclosed the
	character string in single or double quotes.
	For example, MEM:CLE “CUSTOM_1.

-158	String data not allowed
	A character string was received but is not allowed for the command.
	Check the list of parameters to verify that you have used a valid
	parameter type.
	For example, LIM:STAT ‘ON’.

-161	Invalid block data
	A block data element was expected but was invalid for some reason. For
	example, *DDT #15FET. The 5 in the string indicates that 5 characters
	should follow, whereas in this example there are only 3.

-168	Block data not allowed
	A legal block data element was encountered but not allowed by the
	power meter at this point.
	For example SYST:LANG #15FETC?.

-178	Expression data not allowed
	A legal expression data was encountered but not allowed by the power
	meter at this point.
	For example SYST:LANG (5+2).

-211	Trigger ignored
	Indicates that <GET> or *TRG, or TRIG:IMM was received and
	recognized by the device but was ignored because the power meter was
	not in the wait for trigger state.

-213	Init ignored
	Indicates that a request for a measurement initiation was ignored as
	the power meter was already initiated.
	For example, INIT:CONT ON
	INIT.

4-6 HP E4419B User’s Guide