HP Saw E4419B manual RS422

Menu Reference

Front Panel Menu Reference "System/Inputs" Menu

◆

RS422

Press this softkey to select the serial port for remote operation using the RS422 Standard.

■Configure Interface

Press this softkey to access a menu which allows you to either configure the HP-IB interface or the serial interface (RS232/RS422).

◆HP-IB

Press this softkey to access a menu which allows you to set the HP-IB address.

❖HP-IB Addr

Press this softkey to set the HP-IB address of your power meter between 0 and 30. The default value is 13. A pop up

window appears on the screen. Use the , ,

and hardkeys to change the value. To confirm your choice press Enter . Refer to “HP-IB Address”, on page 2-59 for further information.

◆Serial

Press this softkey to access a menu which allows you to set baud rate, word size, parity, number of stop bits, pacing and echo for the serial interface.

❖Baud Rate

❖

❖

❖

Press this key to set the serial interface baud rate. The default value is 9600. A pop up window appears on the screen giving a range of values (50,75,110,150, 300, 1200, 1800, 2000, 2400, 3600, 4800, 7200, 9600, 19.2K, 38.4K, 57.6K or 115.2K).

Word Size

Press this softkey to set the serial interface word length. A pop up window appears on the screen giving a selection of 7 or 8.

Stop Bits

Press this softkey to set the serial interface number of stop bits. A pop up window appears on the screen giving a selection of 1 or 2.

Parity

Press this softkey to enable /disable parity and set the parity type for the serial interface. A pop up window

3-22 HP E4419B User’s Guide