HP Saw E4419B Undefined header, Invalid character in number, Exponent too large, Too many digits

Error Messages

Error Messages

-113	Undefined header
	A command was received that is not valid for this power meter. You may
	have misspelled the command, it may not be a valid command or you
	may have the wrong interface selected. If you are using the short form
	of the command, remember that it may contain up to four letters.
	For example, TRIG:SOUR IMM.

-121	Invalid character in number
	An invalid character was found in the number specified for a parameter
	value.
	For example, SENS:AVER:COUN 128#H.

-123	Exponent too large
	A numeric parameter was found whose exponent was larger than
	32,000.
	For example, SENS:COUN 1E34000.

-124	Too many digits
	A numeric parameter was found whose mantissa contained more than
	255 digits, excluding leading zeros.
-128	Numeric data not allowed
	A numeric value was received within a command which does not accept
	a numeric value.
	For example, MEM:CLE 24.
-131	Invalid suffix
	A suffix was incorrectly specified for a numeric parameter. You may
	have misspelled the suffix.
	For example, SENS:FREQ 200KZ.
-134	Suffix too long
	A suffix used contained more than 12 characters.
	For example, SENS:FREQ 2MHZZZZZZZZZZZ.
-138	Suffix not allowed
	A suffix was received following a numeric parameter which does not
	accept a suffix.
	For example, INIT:CONT 0Hz.

HP E4419B User’s Guide 4-5