HP Saw E4419B manual You delete the frequency the equivalent offset is also

Power Meter Operation

Making Measurements using Frequency Dependent Offset Tables

■ All characters must be upper or lower case alphabetic

characters, or numeric (0-9), or an underscore (_).

■ No other characters are allowed.

■ No spaces are allowed in the name.

2. To edit the parameter you currently have selected press

.

Change

The power meter displays the data in a pop up window. Modify

this data (see below) as desired.

■

Use

or

to modify the character on which the cursor

is currently positioned.

■

Use

or

to move to other characters.

3. To confirm your choice press the appropriate softkey.

4. To adda new frequency dependent offset table entry, press

. You are prompted for the frequency and offset. The entry

Insert

is sorted by frequency.

5. To remove a frequency dependent offset table entry, use the

,

,

and

hardkeys to select the entry, press

. If

Delete

you delete the frequency the equivalent offset is also

removed and

vice versa.

Note

You can only edit the table name you cannot delete it.

6. When you have completed editing the frequency dependent offset

table, press

to return to the “Offset Tbls” screen.

Done

Note

Ensure that the frequency points you use cover the frequency

range of the signals you want to measure. If you measure a signal

with a frequency outside the frequency range defined in the

frequency dependent offset table, the power meter uses the

highest or lowest frequency point in the frequency dependent

offset table to calculate the offset.

2-34 HP E4419B User’s Guide