HP Saw E4419B manual Reference Upper Lower Number Display Line, CFxxx.x% Xxx.xyHza Nn,a

Getting Started

The Display Layout

reference number in the left-hand column to look up Table 1-2 for the combination of sensor type and correction being applied to the current measurement.

For example, the display shows:

50MHz (10,C)

This is equivalent to reference number 4 in Table 1-1 and when looked up in Table 1-2 shows that:

•the sensor type is 8480 series

•a sensor calibration table is selected (10)

•a frequency dependent offset table is selected(C).

Table 1-1

Reference	Upper	Lower
Number	Display Line	Display Line
1	CF:xxx.x%
2	CF:xxx.x%	xxx.xyHz(a)
3	xxx.xyHz	(nn)
4	xxx.xyHz	(nn,a)
5	xxx.xyHz
6	xxx.xyHz	(a)

Where “y” is the frequency multiplier (M or G), “nn” is the sensor calibration table number and “a” is the frequency dependent offset table letter.

HP E4419B User’s Guide 1-9