ZyXEL Communications Remote Management Limitations, G-1000 User’s Guide, Field, Description

Models: G-1000

1 192
Download 192 pages 21.42 Kb
Page 134
Image 134
Figure 84 Menu 24.11 Remote Management Control

G-1000 User’s Guide

Note: If you enable remote management of a service, but have applied a filter to block the service, then you will not be able to remotely manage the service.

Enter 11, from menu 24, to display Menu 24.11 - Remote Management Control (shown next)

Figure 84 Menu 24.11 Remote Management Control

 

Menu 24.11 - Remote

Management Control

TELNET Server:

Port = 23

=

Access = ALL

FTP Server:

Secure Client IP

0.0.0.0

Port = 21

=

Access = ALL

Web Server:

Secure Client IP

0.0.0.0

Port = 80

=

Access = ALL

SNMP Service:

Secure Client IP

0.0.0.0

Port = 161

=

Access = ALL

DNS Service:

Secure Client IP

0.0.0.0

Port = 53

Access = ALL

 

Secure Client IP

=

0.0.0.0

 

Press ENTER to Confirm

or ESC to Cancel:

The following table describes the fields in this menu.

Table 58 Menu 24.11 Remote Management Control

FIELD

DESCRIPTION

 

 

TELNET Server:

Each of these read-only labels denotes a server or service that you may use to

FTP Server:

remotely manage the G-1000.

 

Web Server:

 

SNMP Service:

 

DNS Service:

 

 

 

Port

This field shows the port number for the remote management service. You may

 

change the port number for a service if needed, but you must use the same

 

port number to use that service for remote management.

Access

Select the access interface (if any) by pressing the [SPACE BAR]. Choices are:

 

LAN only, WAN only, All or Disable. The default is LAN only.

Secured Client IP

The default 0.0.0.0 allows any client to use this service to remotely manage the

 

G-1000. Enter an IP address to restrict access to a client with a matching IP

 

address.

Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to Cancel" to save your configuration, or press [ESC] to cancel.

19.3.5 Remote Management Limitations

Remote management over LAN or WAN will not work when:

134

Chapter 19 System Maintenance and Information

Page 134
Image 134
ZyXEL Communications Remote Management Limitations, G-1000 User’s Guide, Menu 24.11 Remote Management Control, Field