Omron V022-E3-1 operation manual 4-9-2Checking the NT600S DIP Switch Settings, Section

￿￿￿￿￿￿.￿￿￿￿￿￿￿￿￿￿ Section 3-9

[ TOOL TRANSMIT CHECK ]

	EXIT
	The data received from the connected support tool/Host are displayed in hexa-
	￿decimal numbers.
	When the check is finished, press the “EXIT” touch switch. Communication I/F
	check menu will be redisplayed.
Note
	The NT600S uses one connector for connection to both the Support tool and the
	PC/Host. If it is connected to other equipment, remove the connecting cable from
	the connector and connect the cable to the connector for the Support tool/Host.
	Then perform a communication check.

4-9-2 Checking the NT600S DIP Switch Settings

Display the NT600S DIP switch settings by using the menu operation from the

System Menu as mentioned below.

[ SYSTEM MENU ]

Quit

Transmit Mode Maintenance Mode

Select “Maintenance Mode”.

	Select “I/O check”.
[ MAINTENANCE MENU ]
Quit	Display History
PT Setting Status
I/O Check
Memory Init.
Memory Switches

￿￿￿