Omron V022-E3-1 operation manual Selecting the Host Communication Method, 4-6-1

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿		-￿￿￿￿￿￿$￿0&￿￿￿￿1￿￿￿￿￿￿￿.￿￿￿￿￿￿-￿￿￿￿￿￿ Section 3-6
	RS-232C method
	[ MEMORY SWITCH MENU (2/2) ]			EXIT
	Automatic Reset		ON
	Data Bit Length		7bits	PREV.
	Stop Bit Length		2bits
				PAGE
	Parity Bit		Odd	SAVE
	Flow Control		XON/XOFF
	RS-232C Speed		19200bps	EXIT
	Automatic Reset		Selecting the Automatic Reset Function (page 90)
	Host Link Speed		Selecting the Host Link Communication Speed (page 86)
	PT UNIT No.		Setting the PT UNIT No. (page 87)
	Data Bit Length		Setting the RS-232C Communication Conditions (page 89)
	Stop Bit Length		Setting the RS-232C Communication Conditions (page 89)
	Parity Bit		Setting the RS-232C Communication Conditions (page 89)
	Flow Control		Setting the RS-232C Communication Conditions (page 89)
	RS-232C Speed		Setting the RS-232C Communication Conditions (page 89)
4-6-1	Selecting the Host Communication Method
	The NT600S can be connected to a PC/Host by the host link, NT link (1:1, 1:N),
	C200H direct, or RS-232C. Either link can be selected by setting the “Comm.
	Method” memory switch. The factory setting has been made to the “Host link”.

Select the host communication method by the menu operation from the System

Menu as mentioned below.

[ SYSTEM MENU ] Quit

Transmit Mode Maintenance Mode

Select “Maintenance Mode”.

	Select “Memory Switches”.
[ MAINTENANCE MENU ]
Quit	Display History
PT Setting Status
I/O Check
Memory Init.
Memory Switches

￿￿