Omron V022-E3-1 operation manual Section, Continuous Screens, Example continuous screens

￿￿￿￿￿￿￿￿￿￿￿￿￿ Section 4-3

Reference Only one numeral setting screen which allows numeric values to be set on the NT600S screen can be registered as a child screen. For the numeral setting,

￿refer to Section 4-8 Numeral Setting (page 143).

Make sure that the touch switches and numbers set in the normal screens do not overlap in an overlapping screen. If the set positions of the touch switches and/or numbers in the normal screens overlap with each other, such settings may sometimes not be effective as intended. Use the support tool and make sure that the set positions do not overlap with each other.

Continuous Screens	A group of normal screens which are related in series and can be switched consec-
	utively is called the “continuous screens”. Up to eight screens can be registered to
	one screen as a group of continuous screens.

The base screen used for registering the continuous screens is called a “parent screen”, and the registered continuous screens are called “child screens”.

The current screen number and the total number of continuous screens can be displayed in the top right corner of the screen. This is called the “page number dis- play”.

Reference The page number is set when creating the screen data by using the support tool. Refer to the “NT-series Support Tool Operation Manual” (V028-E1- ￿).

All display elements except “numeral setting” can be used in the continuous screens.

Reference The screen attributes set in the parent screen become effective in the continuous screens.

[Example continuous screens]

1/3

Continuous screen (1)

Screen #20

[−] touch switch

[↓] touch switch

[−] touch switch

	2/3
Continuous			Screen #15
screen (2)
		[↓] touch switch
	3/3		Screen #5
Continuous
screen (3)

￿Parent screen: #10

Child screens: #20, #15, and #5

When screen #10 (continuous screen) is designated, screen #20 which is page 1 of the continuous screens will be displayed. Screen #15 or #5 can be displayed by using the touch switches. Since screen #10 has been set for the continuous screens, that screen cannot be displayed as an individual screen.

￿￿￿