Omron V022-E3-1 2-1-1, Operations of NT600S, Section, Displays Screens, Sends Data to a PC

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿			Section 1-1
2-1-1	Operations of NT600S
Displays Screens		The information to be displayed (screen data) can be created on a computer by
		using support tools and stored in the NT600S. The screen data can be displayed

on the NT600S in response to the instructions from a PC/Host or touch switch op- eration.

Host

PC

The screen data designated by instructions from PC/Host or touch switch operation is displayed.

Receives Data from a PC/ Host

The NT600S can be connected to a PC/Host, and receive necessary data from it, by using the host link function, the NT link function, the C200H direct communica- tion function, or RS-232C.

Host link, NT link, C200H direct	Host
communication, RS-232C
	PC

OMRON’s PC

Sends Data to a PC Data input through a touch panel can be sent to a PC.

PC

Touch panel

ON/OFF information, numeric data, etc.

Screen Data	The screen data to be displayed on the NT600S can be created by a computer by
	using support tools. Connect the NT600S to a PC/AT with an RS-232C cable so
	that the screen data are transferred to the NT600S.
	Create screen data.

RS-232C

Screen data

PC/AT (support tools)

This connection is made only to transmit the screen data by using NT600S and tools.

(If C200H direct communication is used, the support tool and Host can both be connected at the same time.)

￿