Omron V022-E3-1 5-3-2Screen Attributes, Section, Production Status, Buzzer Attribute

￿￿￿￿￿￿￿￿￿￿￿￿￿ Section 4-3

Switching the Continuous Screens by Using the Touch Switches

Continuous screens can be switched by using the [↓] and [−] touch switches which have the system key functions.

When creating the screen, create touch switches [↓] and [−] to which the system key functions are allocated. (Refer to “System key functions” (page 142).)

1/3

Production Status

Line A: Normal

Line B: Normal

➡

➡

5-3-2 Screen Attributes

	Each screen can be set with a specific function by designating a screen attribute,
	so that the specific function can be executed by displaying the screen. For exam-
	ple, by displaying a screen to which a “buzzer attribute” has been set, the buzzer of
	the NT600S starts sounding.
Reference Use the support tool to set the screen attributes.
	The following several attributes can be set with one screen.
Buzzer Attribute	This attribute will become effective to sound the buzzer in the NT600S when the
	screen to which this attribute has been set is displayed. The buzzer sound can be
	set as follows:
	No:		Buzzer does not sound when the screen is displayed.
	Continuous sound:		Buzzer sounds continuously.
	Intermittent sound:		Buzzer sounds intermittently at constant intervals.
Reference The buzzer sound is set with the NT600S memory switch. The buzzer can also be
	set by using the PC/Host. Refer to “Using the buzzer” (page 94) for the buzzer
	setting using the memory switch.
	To stop the buzzer by using the screen operation, create a [buzzer stop] system
	key as a touch switch.
Numeral Setting Attribute
	Select whether the numeric keys are automatically displayed or the numeric keys
	are created at arbitrary positions on the numeral setting screen. The following two
	numeral setting attributes are used.
	System: The numeric keys registered to the system are automatically dis-
		played.
	User:	The numeric keys can be created at any arbitrary positions.

￿￿￿