Omron V022-E3-1 End Flashing Display, Set Cursor Position, Section, Format, Description

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ Section 6-4

Reference

Canceling the Flash Display

The Set Flashing Display Command is cancelled by the End Flashing Display Command or the Normal Display Command (refer to 7-4-2 Normal Display and 7-4-2 End Flashing Display).

The setting with this command remains valid until the screen display is switched or another display attribute setting is made. The default display attributes are

￿set to a normal display when a screen is initially displayed.

Use this command with the Set Inverse Display Command (refer to 7-4-2 Set Inverse Display) to produce a flashing inverse display.

Use the following command to cancel the flash display mode.

End Flashing Display

Format

[ESC] %

1B

25

Description		Clears the flashing display attribute so that all characters and marks sent subse-
		quently are not flashing. Other attributes remain unchanged.
	Reference ￿The flashing display attribute is set with the Set Flashing Display Command.
		The setting with this command remains valid until the screen display is switched
		or another display attribute setting is made. The default display attributes are
		set to a normal display when a screen is initially displayed.

Specifying the Display Position

The display position of a character-string can be specified by the following com- mand.

Set Cursor Position

Format

[ESC] + x1 x2 x3 y1 y2 y3

1B

2B

x1x2x3: X coordinate (3-digit BCD)

y1y2y3: Y coordinate (3-digit BCD)

Description

X coordinate	Y coordinate
000 to 639	000 to 399

Before displaying a character string with the Terminal commands, use this com- mand to set the bottom-left point of the first character to be displayed.

Reference The cursor position set with this command is also the bottom-left point of the first character displayed if the displayed characters are enlarged.

￿￿￿