Omron V022-E3-1 operation manual Section, Reference, NT600S operation example

￿￿￿￿￿￿￿￿￿&￿￿￿'￿￿(0￿￿'￿￿(0￿"￿￿&￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿				Section 5-1
	The PT status control area (PC to PT) can be allocated to the following PC
	areas.
	Symbol	C Series PCs	Allocated	CVM1/CV Series PCs	Allocated
	DM	Data memory	✓	Data memory	✓
	CH	Internal/Special Relay	✓	Internal/Special Relay	✓
	TIM	Timer		Timer
	CNT	Counter	￿	Counter
	HR	Holding Relay	✓	--
	AR	Auxiliary Relay	✓	Auxiliary Relay	￿
	LR	Link Relay	✓	--
				✓ : OK ￿: NG

Caution

Reference

Since the special auxiliary relays of the CV series PCs are allocated to the system, they cannot be used for purposes other than the system use.

Set so that there is no overlap between the PT status control area and PT status notify area. Otherwise the system may operate unpredictably.

When NT link (1:N) is set, the PT status control area must be set for each con- nected PT.

Notifying the Display Elements by Using Allocated Bits and Words

The NT600S will operate as follows in the display element notification operation.

[NT600S operation]

The NT600S will write any changes in the contents of the numeral or character- string memory table being displayed or pressing of a touch switch to the bits and words area in the PC.

[NT600S operation example]

Touch switch #12	NT600S
Bit009012		Bit 009012:ON
		DM0110:0432
Numeral memory table 100	Numeral memory table0
0 4 3 2	Number of saved words : 1
Copy	First word	: DM0110

PC

￿￿￿