Omron V022-E3-1 operation manual Functions of NT600S, 2-2-1, Features, Section, Downsized Body

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿		Section 1-2
2-2	Functions of NT600S
		The NT600S has the following features which are different from those of existing
		NT600M;
2-2-1	Features
Downsized Body		The NT600S has thin depth (64 mm or less in the panel) in the NT series.
		The width is shorter by 50 mm, maintaining the existing display area.

The tool connectors are located at the rear of the unit.

The communication cable connectors are housed in the unit so that they do not

￿protrude from the unit.

The tool connectors and the PC/Host communication connectors are used in common.

Construction Best Suited to the FA Environment

Easy-to-read screen even in direct sunlight.

Two types of panel are available: the STN LCD panel with backlight and the am- ber EL display panel.

￿Its backlight unit and battery can be replaced at the operation site. Waterproofed to a standard equivalent to IP65 and NEMA 4.

640 dots

400 dots

POWER

RUN

Wide angle of visibility,

50￿to left and 40￿to right

1:1 and 1:N Communications Possible with “NT Link” Method

Connection in 1:1 and 1:N NT link systems is possible.

All you have to do is connect to the host; no complicated installation work is nec- essary.

A flash memory is used for the screen data memory, making battery backup un-

￿necessary.

The following communication methods are standard: host link (direct), NT link (1:1, 1:N), and RS-232C.

￿