Special Features

￿￿￿￿￿￿￿￿￿￿￿￿￿￿

 

Appendix A

 

Special Features

 

 

 

 

 

 

 

Item

 

Specification

 

 

 

 

 

Buzzer

Two types:

Continuous sound and intermittent sound

 

 

Setting:

Set “key press sound” in the “Memory Switch” menu of the

 

 

 

Maintenance Mode ON.

 

 

 

If “ERR ON” is set the buzzer only sounds when an error occurs.

 

 

ON: The buzzer sounds on designation from the PC/Host, when a screen

 

 

with a buzzer-ON specification is called, or on display of an error screen

 

 

such as for a receive error.

 

 

OFF: The buzzer is turned off on designation from the PC/Host, by touch

 

 

switch input, or when a screen without a buzzer-ON specification is

 

 

displayed.

 

 

Sound pressure: Min. 80 dB, average 87 dB (measured 10 cm from front face)

 

 

 

 

Maintenance functions

Self-test for memory, switches, etc.

 

 

Status setting confirmation for communications and other conditions.

 

 

Simple communications confirmation.

 

 

 

 

Backup by battery

Connecting an optional battery makes the display history recording and

 

 

resume functions available. (Data retaining time: 5 years (at 25￿C))

 

 

If battery voltage becomes low, the RUN LED on the front panel lights in

 

 

orange and the communication flag (BAT LOW) to the Host is turned ON

 

 

￿(set to “1”).

 

 

The battery can be replaced at the rear of the NT600S while it is running.

 

 

 

 

Key input sound setting

0.2 second input sound when a touch switch is pressed

 

 

Setting: Set “key press sound” of the “Memory Switch” menu in the

 

 

Maintenance mode ON.

 

 

 

 

Display history recording

Available only when the optional battery is installed.

 

Resume function

With the standard specification, these functions are not available since the

 

 

battery is not installed.

 

 

 

 

 

￿￿￿

Page 271
Image 271
Omron V022-E3-1 operation manual Appendix A, Special Features