Manuals / Omron / Household Appliance / Thermostat

Omron V022-E3-1 operation manual Appendix G

Models: V022-E3-1

1 318

Download 318 pages 5.12 Kb

Page 293

Appendix G

Appendix G

APPENDIX G

Function Restrictions Depending on the Support Tool

When using the direct connection function, screens can be created by using the conventional support tools indi- catedbelow.

NT series NT20M/NT2000M/NT600M support tool (Ver.4.)

In addition, the NT series support tool (Ver.2.) can be used with Ver.4 of the direct connection function. However, when the above support tools are used or Ver.4 direct connection is used, restrictions apply to some func- tions, as shown in the table below.

The expressions used for support tools in the table have the following meanings.

	NTM V4	: NT series NT20M/NT2000M/NT600M support (Ver.4.)
	NT V2	: NT series support tool (Ver.2.)

	Support	NT Model	Direct	Communication Mode	Support Tool Mode	Restrictions
	Support		Direct		(NT600S memory
	Tool		Connection		(NT600S memory
	Tool		Connection		switch)
					switch)

	NTM V4	NT600M	OMRON	--(Standard)	NT600M	Thumbwheel numeral settings
	NTM V4	NT600M	OMRON	--(Standard)	NT600M	not possible, no upper/lower
						not possible, no upper/lower
						limits, hexadecimal input not
						limits, hexadecimal input not
		NT600M	Ver. 4	Standard	NT600M	possible, indirect specification
		NT600M	Ver. 4	Standard	NT600M	not possible, touch switch input
						not possible, touch switch input
	NT V2					notification fixed as “momentary”,
						notification fixed as “momentary”,
		NT600S	Ver. 4	Standard/High-speed	NT600S	data transmission in screen units
		NT600S	Ver. 4	Standard/High-speed	NT600S	data transmission in screen units
						not possible.
		NT600S	Ver. 5	Standard/High-speed	NT600S	No restriction

The NT600S cannot be used with combinations of support tools and settings other than those indicated above.

Reference When using RS-232C communications, the NT series support tool (Ver.2.). However, the NT series NT20M/NT200M/NT600M support tool (Ver.4.) cannot be used.

The necessary support tool and “Tool Mode” (NT600S memory switch) settings in this case are as follows:

PT model	:	NT600S
Direct setting	:	No
Communication mode :		Standard/High-speed
Tool Mode	:	NT600S

Image 293

Omron V022-E3-1 operation manual Appendix G

Contents

Cat. No. V022-E3-1 NT-seriesProgrammable TerminalOperation Manual Page •OMRON,1997 OMRON Product ReferencesVisual Aids Page SECTION TABLE OF CONTENTS5, # SECTIONINDEX APPENDICESSECTION SECTIONAbout this Manual Creatingand Transferring Screen Data Manuals?%%%##+#PRECAUTIONS 1 Intended Audience 2 General Precautions3 Safety Precautions Safety Precautions continued Severe temperature variations Safety Precautions continuedtion Safety Precautions continuedPage SECTION Functions of the NT600S Section Role and Operation of NT600SAlarm Production Line StatusOperations of NT600S 2-1-1Section Displays ScreensFunctions of NT600S Features2-2-1 SectionSection Section 2-2-2Principal Functions of NT600SFunctions Related to the Data Display Functions Related to the Data InputSection Comparison between NT600S and NT600M2-2-3 put notification SectionTouch Switches 2-2-5DisplaysSection Characters textSection 2-3System ConfigurationWhen using the Host Link/NT Link 1:1 Function Reference NT Link 1:N Systems SectionC200HX/HG/HE OMRON PC NT600SSection I/O connecting cable C200H interface unitType NT-LB122 Support tool Personal computer : IBM PC/AT or compatibleFunction 2-4Direct Connection FunctionSection Features of the NT Link 2-4-1What is the NT Link 1:NSection ReferenceAdvantage of C200H Direct Communication 2-4-2C200H Direct CommunicationSection Functions of Display Elements 2-5Functions of the Allocated Bits and WordsSection Section Touch switches Allocation destination: BitExample of the PT status notify area application SectionExample of the PT status control area application Operation commands 2-6Communications by RS-232CTerminal commands SectionWhen using Host Link/NT Link/RS-232C 2-7Before OperatingSection ReferenceEquipment or Software SectionPage SECTION Hardware Settings and Connections 3-1-1Description of Parts 3-1Description of Parts and SettingsSection Front ViewNT600S-ST121-EV NT600S-ST121B-EV SectionRear View Reference 3-1-2DIP Switch SettingsSection Section 3-2Installation3-2-1Installation to the Operation Panel Section 3-2-2Power Supply ConnectionSection 3-2-3GroundingSection 3-3Connecting to the Support ToolCompatible PCs 3-4Connection to a PC by the Host Link3-4-1 SectionSection 3-4-2Connecting the NT600SConnecting to a PC with a 25-pinConnector Connecting to a PC with a 9-pinConnector $& SectionConnecting the NT600S to a C Series CQM1 Unit Connecting to C Series C200HX/HG/HEConnecting to C Series CPM1 3-4-3PC Switch SettingsWhen Long-DistanceTransmission is Required SectionSetting the front switches Connecting to a Host Link UnitSetting the rear switches Setting the front switchesSection Setting the rear switchesI/O port selection selector switch C500/C1000H rack-mountingtype: C500-LK203 Setting the rear switchesSection CPU-mountedtype: C120-LK201-V1 Setting the rear switchesSection Section Setting the front switchesUnit # SW3 and SW4 Set these switches to “0” Section Connecting to a CPUSetting the frontswitches Switch settings C200HS,C200HX/HG/HE, CQM1 Making the PC system settingsSwitchsettings CPM1 PC system setting area settingsWhen using port B of C200HX/HG/HE When using port A of C200HX/HG/HEWhen using CPM1 SectionSection 3-5Connection to a PC by the NT Link 1:13-5-1Compatible PCs When Long-DistanceTransmission is Required 3-5-2Connecting the NT600SSection If a Cable Longer Than 5 m is RequiredSection 3-5-3PC Switch SettingsSwitch setting C200HS,C200HX/HG/HE, CQM1 Section 3-6Connection to a PC by the NT Link 1:N 3-6-2Connecting the NT600S Units3-6-1Compatible PCs SectionSection Connection DiagramSection Converter Unit Connector SpecificationsRS-422Aconnection Wiring MethodSection RS-422ACable Wiring ➀ RS-232CCable Wiring NT600S-ST121B-EVRS-422ACable Wiring ➁ SectionSection RS-232CCable WiringRS-485connection NT-AL001to NT-AL001Section NT-AL001Converter Unit DIP Switch SettingsRS-422Aconnection, RS-232Cat the PC side RS-485connection, RS-232Cat the PC sideRS-422Aconnection, RS-422Aat the PC side SectionRS-485connection, RS-485at the PC side NT600SNT600SNT600SSection 3-6-3PC Switch SettingsSection 3-7-1Compatible PCsSection Mounting and Setting the C200H Interface UnitC200H Interface Unit Part Names and Functions Mounting the Unit to the NT600SSection C200H Interface Unit Switch SettingsRemoving the unit out while keeping a firm gripSection 3-7-2Connection MethodI/O connecting cable Connection to a C200H/C200HS, C200HX/HG/HE SectionCPU unit I/O connection cableOnly one CPU unit can be connected SectionPower OFF Power ONSwitch the power OFF in the following way Section3-8-2Connector Pin Arrangement 3-8-1Host Computer Communication Settings3-8Host Connections by RS-232C SectionSection Connecting to the Host ComputerSECTION System Menu Operation Memory Switch Setting page 4-1Operation Flow by the System MenuSystem Maintenance page Section4-2Starting the NT600S 4-2-1Changing the System Settings etcProcedure SectionSection 4-3Operation Modes and the System Menu4-3-1System Menu and the Operation Modes Section 4-3-2Menu TreeSYSTEM MENU Quit Transmit Mode Maintenance mode Section 4-3-3Operations with the System MenuMAINTENANCE MENU SYSTEM MENU Quit Transmit Mode Maintenance ModePT Setting Status Memory SwitchesSection 4-4Initializing Memory4-4-1Initialization of the Screen Data SYSTEM MENU Quit SectionInitialize the Screen Data Memory? Confirm Cancel Memory SwitchesSection MEMORY INITIALIZATION MENU QuitSYSTEM MENU Quit SectionMAINTENANCE MENU Initialize the Memory Tables? Confirm CancelPT Setting Status Memory SwitchesInitialize the Display History? Confirm Cancel Memory SwitchesInitialization of the Memory Switch SectionSYSTEM MENU Quit SectionTransmission --Transmission in File Units 4-5Registering the Screen DataSection Transmission in Screen Units SectionReference Support toolSYSTEM MENU Quit SectionTRANSMIT MODE EXITSection Memory Switches MEMORY SWITCH MENU 1/2Setting Functions and the Memory Switch Menu EXITAutomatic Reset 4-6-1 Selecting the Host Communication Method4-6-2Baud Rate Selection Host Link Only 4-6-3Setting Unit Numbers NT Link 1:N Only MAINTENANCE MENU Section Setting the RS-232CCommunication Conditions4-6-4 4-6-5Selecting the Automatic Reset Function Select “Memory Switches” Section 4-7Starting the OperationSection 4-8Various System Settings4-8-1Setting the Key Press Sound 4-8-2 Using the BuzzerSetting the Buzzer SectionSection Setting the BuzzerEXIT NEXTSection 4-8-3Backlight OFF / EL Screen OFF FunctionSection Select “Memory Switches”Menu shown below SectionSection 4-8-5Setting the Support Tool ModeSupport Tool Mode SectionSection 4-9System Maintenance4-9-1I/O Check Section SYSTEM MENU Quit Transmit Mode Maintenance ModeSection Transmit Mode Maintenance ModeChecking the Backlight NT600S-ST121Only SectionChecking the LCD/EL display SYSTEM MENU Quit SectionSYSTEM MENU Quit SectionSection 4-9-2Checking the NT600S DIP Switch SettingsSection 4-9-3Checking the PT Setting StatusChecking the PT setting Status Section MAINTENANCE MENUSection 4-9-4Display HistorySYSTEM MENU Quit SectionDisplay in time order SectionSECTION NT600S Functions Section 5-1Creating and Transmitting Screen DataSection 5-1-2Creating Screen DataScreen Data Creation Procedure Select “Edit Screen” SectionSelect a screen number and press Enter SectionTransmitting Screen Data to the NT600S Section5-2-1NT600S Screen 5-2Outline of FunctionsSection Screen ManagementTypes and Attributes of Characters and Figures SectionTypes and Attributes of the Figures SectionReference Smoothing Communication Using RS-232C 5-2-3Communication with the HostSection Controllable NT600S FunctionsAscertainable NT600S Statuses Section5-3-1Classification of Screens 5-3Screen DisplaySection Normal ScreenExample continuous screens SectionContinuous Screens Numeral Setting Attribute 5-3-2Screen AttributesSection Production StatusBacklight attributes NT600S-ST121only SectionBit input attributes RS-232Ccommunication only 5-4-1 Character-StringMemory Table 5-4Memory TablesSection Displaying a Character-stringDisplaying a Numeral 5-4-2Numeral Memory TableSection Numerals Which can be Displayed Section5-5-1Bar Graph Functions 5-5Bar GraphsSection Bar Graph AttributesPage To display a value below 0 % Sign display “Yes” SectionSection When the frame is displayed5-6-1Lamp Functions 5-6LampsSection Lamp AttributesControlling lamps in a batch SectionOMRON SectionOMRON Correct use 5-7Touch SwitchesSection Reference 5-7-1Functions of Touch SwitchesSection Section Functions of touch switchesSection 5-7-2Standalone FunctionAllocation of System Key Functions 5-7-3System Key FunctionsSection Section 5-8Numeral Setting5-8-1Function of Numeral Keys Section 5-8-2Types of Numeral SettingThumbwheel Type Ver.5 Direct Connection Only SectionSection 5-8-3Creating Numeric KeysContinuous screens and overlapping screens SectionSection 5-8-4Using Numeric KeysSelecting the Numeral Setting Area for Data Input numeric values including a decimal point Section 5-8-5Using Thumb Wheel KeysOnly When Direct Connection Ver.5 is Specified Upper/lower limit check SectionPage SECTION Using Host Link/NT Link/C200H Direct Allocatable Bits and Words Equipment and Settings Used in This Chapter6-1-1 6-1-2&00& 6-1-3NT600S Status Control and Notification to PCSection NT600S operation&00& Section Reference SectionNT600S operation NT600S operation exampleReference Reference &00& SectionSection &00&Reference PT status notify bits 15 14 13 12 11 10 9 8 BitSection 6-1-4Switching the Screen Display&00& Section Example of Display Screen SwitchingSection 6-1-5Notifying the Display Screen to the PC&00& PT status notify area: Word &00& SectionWriting Words to the Character-StringMemory Table 6-2Memory Tables and Bar GraphSection Section Direct specificationWriting Numerals to the Numeral Memory Table SectionSection Setting the Words of the Numeral Memory TableSection Contents of the numeral memory tablesAvailable allocation words Stored as a single wordNumeral memory table display examples SectionExample of character code bestriding words Character-stringmemory table display example3 Section PC ladder program Section1 is explained SectionLine NT600SSection Reference 6-2-4Copying the Memory TableSection Available allocation words SectionMemory Map page Use “table edit”Section NormalPC ladder program Section6-2-5Upgrading Bar Graphs Changing the Contents of Allocated WordsSection Reference Reference6-3-1Allocation Bits and Display of Lamps 6-3Lamps, Touch Switches, and Numeral SettingSection Example of batch lightingSection ProcedureLine SectionProcess Conveyor Loading Robot ArmMethod for PC Notification and NT600S Control SectionNotes on the Notification Operation SectionSection 6-3-4Lit Flashing and Unlit Touch Switch StatusesChanging the Status of Allocated Bits Momentary : 0 OFF ... Not pressed 1 ON ... Pressed SectionApplication SectionSection RUN STOPSection 6-3-6Notification of Numbers to the PCRestrictions on allocating words SectionLine Sectionunit unitSection 6-4NT600S Status Control6-4-1Controllable NT600S Functions Connection to RS-232Cport of C200HX/HG/HE Sectionbuzzer stop attribute function is allocated SectionReference Reference Procedure 6-4-2How to Control NT600S FunctionsSection ApplicationPC program Create the following PC ladder program SectionSection Section 6-5-2Reading the NT600S Operating StatusesSection Example of Using the PT Status Notify BitProgram operation SectionSECTION Using the RS-232CInterface Unit 7-1 RS-232CInterface Unit Communications 7-1-1Communication ProcedureSection OPENOperation by Operating Commands #%1 SectionOperation by Terminal Commands Message from Host to NT600SCommand Length 7-1-2PrecautionsInterval Between Transmitted Commands Controlling PT Status with Operating CommandsSection 7-1-3Notification and Control of Touch Switches7-1-4 Table of CommandsOperating Commands Terminal CommandsDelete 7-2-1Displaying the Screen 7-2Commands Sent by the HostDisplay Specified Screen Switching the Display ScreenRequest Screen Number 7-2-2Memory TablesWrite Character-stringMemory Table Section8-digitWrite Numeral Memory Table 4-digitWrite Numeral Memory TableSection Writing NumeralsSection Copy Memory TableFormat DescriptionLamp and Touch Switch Display Bit Specification 7-2-3Lamps and Touch SwitchesSection FormatBit OFF: The lamp or touch switch is turned off Lamp and Touch Switch Display Status EnquirySection ExampleTouch Switch Enable Touch Switch DisableDisabling/Enabling the Touch Switch Input SectionScreen Display Control 7-2-4Controlling the NT600S StatusBuzzer Control SectionPT Status Enquiry System Menu Display PermissionInitialize Display History Enquiry of the Battery Voltage StatusSection Display Mode ControlFormat Description7-3-1Screen Display 7-3Commands Sent by the NT600S7-3-2Memory Table Screen Number ResponseLamp and Touch Switch Display Status Response 7-3-3Lamps and Touch Switches8-digitNumber Input Notify ported to the Host with this commandNotifying that a Touch Switch Has Been Pressed Touch Switch Bit Output from NT600S to HostSection FormatPT Battery Status Response Touch Switch Number Output from NT600S to HostNotifying Low Battery Voltage Section7-4-1Clearing the Screen 7-4Terminal Commands7-4-2Displaying a Character-String Clear ScreenNormal Display Specify Character EnlargementCanceling the Inverse/Flashing Display SectionEnd Inverse Display Set Inverse DisplaySet Flashing Display Canceling the Inverse DisplaySet Cursor Position End Flashing DisplayReference Canceling the Flash Display SectionSpecify Displayed Characters 7-4-3Displaying FiguresDraw Polyline SectionSection Draw CircleDisplaying the Circle FormatSection 7-5Key to Programs7-5-1Use of Programs Section 67.$6$3+01@ ##############################23456782249D!4244D 1###1%#L?#?+/%11 1?1N+1-.1> Page 0&/RJ CI+1E249H+ JK1/1JK11 B!684965D671JK11JK11.M ######################################4I645C2JK11 JK11JK11+ 2D5IUU1D634567 54!745673684934567 4B34567Page Page 921<=1 54!754!78 54!74U?55.+ %&=4$=##!$%0=4&4%46&%Section 8-1Hardware FaultsSection Errors Occurring when the Power is Turned ON Responding to Displayed Error MessagesErrors Occurring During Operation 8-2-1Section 8-2-4Communication ErrorsScreen when an error has occurred during sending Section Overrun ErrorSection 8-3Maintenance of the NT600SSpare PT BacklightScrew securing CFL case lid CFL case lid SectionReplacing the Backlight 3.Remove the backlight SectionSection Replacing the BatteryOperation ips head screwdriver, then open the CFL case lidSection 3.Pull out the battery together with the connectorCleaning Method Inspection and CleaningSection Inspection MethodCautions on replacing the NT600S SectionPage General Specifications SpecificationsAPPENDIX A Appendix ADisplay Specifications Performance SpecificationsPanel Specifications Appendix AAppendix A Display Element SpecificationsDisplay Capacity Number of numeral memory tables that can be usedAppendix A Special FeaturesAppendix A Communications SpecificationsFor a Host Link For an NT Link 1:1APPENDIX B DimensionsAppendix B POWER RUNCable Installation InstallationAppendix B Unit : mm inch&!#0!891 Installation and RemovalAPPENDIX C Handling the RS-232C/RS-422Converter UnitInstallation in an Operation Panel Installation on a DIN Rail&!#0!891 Appendix CAppendix D NT600S Installation EnvironmentAPPENDIX D Appendix D Transportation and Storage of the PTNote on transportation Note on storageMaking the Cable for Connection to the PC APPENDIX EAppendix E Parts RequiredAppendix E NT600S Connector Specifications 9-pinCorrect Use an NT600S to a C-SeriesHost Link2. C500-LK201and C200H-LK201-V1only Appendix E Wiring ConnectionsCommunication Port 1 25-pinConnector $0& Appendix ECommunication Port 2 9-pinConnector an NT600S to a CVM1/CV-SeriesHost Link UnitCommunication Port 1 25-pinConnector Wiring ConnectionsCommunication Port 2 9-pinConnector Appendix EApplicable CPU Appendix Eprevious to 15Y5 cannot be connected Appendix EWiring NT-AL001 RS-422Aterminal block specificationsAppendix E For NT600S-ST211B-VCable Preparation Making the CableAppendix E Soldering Appendix EConnector Cover Assembly Preparing RS-232CConnector CablesAppendix E Recommended PartsAPPENDIX F Connecting to an RS-232C/RS-422Converter Unit 1:1#0!891*+ Appendix FAppendix F #0!891*+RS-422ACable Wiring Appendix G APPENDIX GAPPENDIX H Wiring ConnectionsParts Required Appendix HAppendix H With a 9-pinConnectorAPPENDIX Periodic Processing When Using Direct ConnectionNT600S Internal Processing AppendixAppendix Appendix Event Processing When Using Direct ConnectionNT600S processing Details of processingHost Link Unit APPENDIX JModel List Appendix JAppendix J CPUs For Connection Via a Host LinkAppendix J CPUs For Connection Via an NT Link 1:1CPUs For Connection Via an NT Link 1:N RS-232C/RS-422Converter Unit Related Parts and Equipment for PTRS-232CAdapter Appendix JCables with connectors Parts Used for ConnectionApplicable connectors Appendix JOption List APPENDIX KAppendix K Replaceable Backlight ... NT600S-CFL01Chemical-resistantCover .. Type NT600S-KBA01 Appendix KThis is a lithium battery used for memory backup Battery ... 3G2A9-BAT08Appendix K C200H Interface Unit ... NT-LB122OMRON C-SeriesMemory Map APPENDIX LOMRON CV-SeriesMemory Map PC Memory MapAppendix M APPENDIX MSpecial Characters English Character Codes Hex Digits 1: Used as the prefix for mark data codes 2 bytes Appendix MPage INDEX Initialization of the display history data Initialization by using the DIP switchMemory initialization by using the DIP Lamp and touch switch display statusLamp and touch switch display status Set a system key function for a touch Use touch switches for notification to the Touch switches used to call the systemPage Operation Manual NT-series Programmable TerminalRevision History