Omron V022-E3-1 operation manual Section, SYSTEM MENU Quit, Transmit Mode, Exit

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ Section 3-5

Reference By setting the Support Tool Mode to “NT600M”, the NT600S is made compatible with the existing NTM support tool. For details on setting the Support Tool Mode, refer to page 99.

4.Enter the “Transmit Mode” by operating the menu of the NT600S as men- tioned below.

[ SYSTEM MENU ]

Quit

Transmit Mode Maintenance Mode

Select “Transmit Mode”.

[ TRANSMIT MODE ]

EXIT Support Tool Mode: NT600S

5.Select a screen data to be transmitted to the NT600S in the File Selection screen of the support tool, and press the Send key.

6.The NT600S will display the following screen when the screen data is being transmitted.

[ TRANSMIT MODE ]

Tool → PT

Screen Data

0 KB

EXIT Support Tool Mode: NT600S

￿￿