Manual background

2￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Section 3-8

Starting from the system menu, make the following menu selections to set the

Support Tool Mode.

[ SYSTEM MENU ]

Quit

Transmit Mode

Maintenance Mode

Select “Maintenance Mode”.

 

Select “Memory Switches”.

[ MAINTENANCE MENU ]

Quit

Display History

PT Setting Status

 

I/O Check

 

Memory Init.

 

Memory Switches

 

[ MEMORY SWITCH MENU (1/2) ]

Comm. Method

Host Link

EXIT

 

Key Press Sound

OFF

NEXT

Buzzer Sound

OFF

PAGE

Putting-Out Time

None

SAVE

Resume Function

ON

Support Tool Mode

NT600S

EXIT

 

Each time the “Support Tool Mode” touch switch is pressed, the setting option changes from “NT600S” to “NT600M” or from “NT600M” to “NT600S”.

To set and quit the menu, press the [SAVE EXIT] touch switch. To quit without setting, press [EXIT].

When “NT600M” is set, the NT600M compatible mode is established and the

￿NT600S can be used as if it were an NT600M.

When “NT600S” is set, the NT600S can be used as an NT600S.

￿￿￿

Page 114
Image 114
Omron V022-E3-1 operation manual Section, Support Tool Mode