Omron V022-E3-1 MEMORY SWITCH MENU 1/2, Exit, Putting-OutTime, Key Press Sound, Next, Save

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿-￿￿￿￿￿￿$￿0&￿￿￿￿1￿￿￿￿￿￿￿.￿￿￿￿￿￿-￿￿￿￿￿￿ Section 3-6

4-6 Setting the Conditions of Communications with the PC/ Host by Using the Memory Switches

	The communications between the NT600S and a PC/Host are called the host
	communications.
	The NT600S can be connected to a PC/Host by the host link, NT link (1:1, 1:N),
	C200H direct, or RS-232C. The link can be selected by setting the memory switch.
	Also, the host link baud rate, automatic reset function, RS-232C communication
	conditions, etc. are set with the memory switches.
	This section describes the communications condition settings by using the
	memory switches.
Memory Switches	The NT600S has the memory areas used to store the PC/Host connection meth-
	od, communications conditions, system settings, etc. which can be used as the
	switches and called the “memory switches”. Since the memory switches use the
	flash memory, the stored data can be held even when the power supply is turned
	OFF.
	If for any reason the set memory switch data is destroyed, a message will be dis-
	played on switching to the run mode. If this happens, press the [Write] touch
	switch to initialize the memory switches.
Setting Functions and the Memory Switch Menu
	The memory switches can be set easily by using the memory switch menu in the
	System Menu.
	The functions that can be selected (memory switch menu) differ according to the
	communication method selected, as shown on the next page. For details on each
	function, refer to the next section onward and to 3-8 “ Various System Settings”
	(page 93).
	[MEMORY SWITCH MENU 1 (When LCD display screen is used.)]
	[ MEMORY SWITCH MENU (1/2) ]		EXIT
	Comm. Method	Host Link
	Key Press Sound	OFF	NEXT
	Buzzer Sound	OFF
			PAGE
	Putting-Out Time	None	SAVE
	Resume Function	ON
	Support Tool Mode	NT600S	EXIT
	Comm. Method	Selecting the Host Communication Method (page 85)
	Key Press Sound	3-8 Various System Settings (page 93)
	Buzzer Sound	3-8 Various System Settings (page 94)
	Putting-Out Time	3-8 Various System Settings (page 96)
	Resume Function	3-8 Various System Settings (page 98)
	Support Tool Mode	3-8 Various System Settings (page 99)

￿￿