Omron V022-E3-1 operation manual Section, Select “Memory Switches”

2￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ Section 3-8

	Select “Memory Switches”.
[ MAINTENANCE MENU ]
Quit	Display History
PT Setting Status
I/O Check
Memory Init.
Memory Switches

[ MEMORY SWITCH MENU (1/2) ]

Comm. Method	Host Link	EXIT
Key Press Sound	OFF	NEXT
Buzzer Sound	OFF
		PAGE
Putting-Out Time	None	SAVE
Resume Function	ON
Support Tool Mode	NT600S	EXIT

Each time the “Putting-Out Time” touch switch is pressed, the setting option will switch among “10 min”, “1 hour”, and “None”.

Caution

Note

To set and quit the menu, press the [SAVE EXIT] touch switch. To quit without

￿setting, press [EXIT].

When “None” is set, the backlight OFF/EL screen OFF function is not effective and the same screen will therefore remain displayed indefinitely even if no op- eration is performed.

When “10 min” is set, the backlight or the EL screen will be turned off when no

￿operation has been performed for 10 minutes.

When “1 hour” is set, the backlight or the EL screen will be turned off when no operation has been performed for 1 hour.

Do not press touch switches carelessly while the backlight is off or while nothing is displayed on the screen.

Otherwise the system may operate unpredictably.

Only press touch switches after confirming system safety.

Continuous display of the same pattern for an extended time (as a guide, about 1 hour) will lead to the formation of an afterimage.

In order to prevent this, either periodically switch screens or use the EL screen OFF function.

￿￿