Programmable Settings
35
Programming via direct commands
You can also programme most features using “direct commands”—special codes that take
you directly to the feature you wish to programme and allow you to select the desired
setting. There is no need to scroll through the unit’s menus.
Details of each feature can be found on the corresponding pages.
1Press {MENU}.
2Enter the desired feature code (shown below).
3Enter the desired setting code (shown below).
LThis step may vary depending on the feature being programmed.
4Press {Save}.
5Press {OFF} to exit programming mode.

Direct commands chart

Feature Feature code Setting code Page
Ringer volume {1} {1}{1}: Low {2}: Medium
{3}: High {0}: Off
page 30
Ringer tone {1} {2}{1}–{3}: Tone pattern 1–3
{4}–{7}: Melody pattern 1–4
page 30
Interrupt tone*1 {1} {3}{1}: On {2}: 2 times {0}: Off page 31
Voice enhancer {5}{1}: On {0}: Off page 31
Dial lock {6}Go to step 3 on page 33. page 33
LCD contrast {0} {1}{1}–{6}: Level 1–6 page 32
Key tone {0} {2}{1}: On {0}: Off page 34
Auto talk {0} {3}{1}: On {0}: Off page 31
Set area code {0} {4}Go to step 4 on page 33 page 33
Set dial mode {0} {5} {1}– page 42
Set recall time {0} {5} {2}{1}: 700 ms {2}: 600 ms
{3}: 400 ms {4}: 300 ms
{5}: 250 ms {6}: 110 ms
{7}: 100 ms {8}: 90 ms
page 32
Set line mode {0} {5} {3}{1}: A {2}: B page 32
Handset registration {0} {0}Go to step 4 on page 34. page 34
Copy phonebook
(1 item)*1
{#} {1}Go to step 4 on page 22. page 22
Copy phonebook
(all items)*1
{#} {2}– page 23
TG2421AL_2422AL(e).book Page 35 Tuesday, March 15, 2005 6:29 PM