Programmable Settings
33
3Scroll to “Set tel line” by pressing
{V} or {^}, then press {>}.
4Scroll to “Set line mode” by pressing
{V} or {^}, then press {>}.
5Press {V} or {^} repeatedly to select
the desired setting.
6Press {Save}, then press {OFF}.
Storing your area code
We recommend storing your area code
before using Caller ID (page 24). Calls
from the same area will be recorded in the
caller list without the area code. You do not
have to remove it before calling back the
caller or storing in the phonebook.
1Press {MENU}.
2Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3Scroll to “Set area code” by pressing
{V} or {^}, then press {>}.
4Enter your area code (max. 8 digits).
LTo correct a digit, press {<} or {>} to
move the cursor, then press
{CLEAR}. Enter the correct number.
5Press {Save}, then press {OFF}.
To erase your area code
Press and hold {CLEAR} in step 4, press
{Save}, then press {OFF}.
Other optionsDial lock
This feature prohibits making outside calls.
The default setting is OFF.
Important:
LWhen dial lock is turned on, only
phone numbers stored in the
phonebook as emergency numbers
(numbers stored with a # at the
beginning of the name) can be dialled
using the phonebook (page 20). We
recommend storing emergency
numbers in the phonebook before
using this feature.
LWhen dial lock is turned on, you cannot
store, edit, or erase items in the
phonebook.
To turn dial lock on
1Press {MENU}.
2Scroll to “Dial lock” by pressing {V}
or {^}, then press {>}.
3Enter a 4-digit password.
LThis password is required when
turning dial lock off. We recommend
writing the password down.
4Press {Save}.
5Press {Yes}.
L“Dial lock on” will be displayed.
6Press {OFF}.
Note:
LIf dial lock is turned on, the handset
displays “Dial lock”. While there are
missed calls, “Dial lock” is not
displayed when the handset is off the
base unit or charger.
TG2421AL_2422AL(e).book Page 33 Tuesday, March 15, 2005 6:29 PM