Wall mounting, Base unit | Panasonic KX-TG2421AL specs

TG2421AL_2422AL(e).book Page 38 Tuesday, March 15, 2005 6:29 PM

Useful Information

Wall mounting

Base unit

The base unit can be mounted on a wall.

1 Connect the AC adaptor and the telephone line cord.

Fasten the AC adaptor cord.

Hooks

To power outlet

2 Drive the screws (not included) into the wall using the wall mount template (see below). Connect the telephone line cord. Mount the unit, then slide it down.

LRaise the antenna.

Screws (not included)

82 mm

To telephone plug connected to socket

Wall mount template for the base unit

82 mm

38

Image 38

Panasonic KX-TG2421AL operating instructions Wall mounting, Base unit, Wall mount template for the base unit

Contents

Charge the battery for 6 hours before initial use Model No. KX-TG2422AL Introduction Index Introduction Your phone Accessory information Included accessories Accessory items Quantity Important safety instructions Installation Battery Medical Environment For best performanceBase unit location/noise Routine care Charger KX-TG2422AL only ConnectionsBase unit Battery installation If you subscribe to an Adsl service Battery icon Battery strength Battery chargeBattery strength Recharging the battery Recharge battery Battery replacementBattery performance Operation Operating time Controls Antenna USE indicator Charge contacts Charge indicatorControls and display Base unit KX-TG2421AL KX-TG2422AL Handset Speaker Soft key Headset jack Talk Navigator key SP-PHONE Calls Conf DisplayRcvd Making calls KRecall CallL Auto talk To make a call using the redial listAnswering calls Temporary ringer off Mute button Useful features during a callHold button Voice enhancer Call share KX-TG2422AL only Pause button for PBX/long distance service usersClarity booster Recall button Using the phonebook Adding items to the phonebook DB=Scroll list Calling someone Phonebook=Name search During an outside call, press Menu Chain dial featureCopying phonebook items KX-TG2422AL only TG2421AL2422ALe.book Page 23 Tuesday, March 15, 2005 629 PM Call waiting and Caller ID compatible Using Caller ID serviceCaller ID features For Caller ID Type II users Missed Calls Rcvd Phone Kcalls Book L Caller listViewing the caller list and calling back Example Jack Smith 310P 29JUN 0555333444 310P 29JUN Storing caller information into Before calling backErasing caller information Erasing a selected item For KX-TG2421AL users Handset locatorIntercom KX-TG2422AL only For KX-TG2422AL users Conference calls KX- TG2422AL only Guide to handset programming Main menu Sub-menu Ringer volume Low High KBack dB SaveL Ringer settingsHandset ringer volume Handset ringer tone Auto talk Call optionsHandset interrupt tone KX- TG2422AL only Display options Telephone settingsLine mode Handset LCD contrast Dial lock Other optionsStoring your area code To erase your area code To turn dial lock off 1 Press Menu Handset key toneRe-registering the handset Feature Feature code Setting code Programming via direct commandsDirect commands chart TG2421AL2422ALe.book Page 36 Tuesday, March 15, 2005 629 PM To attach the belt clip To remove the belt clip Belt clipHeadset optional To connect an optional headset to the handset Wall mount template for the base unit Wall mountingBase unit Charger KX-TG2422AL only Wall mount template for the charger Error messages General use Programmable settingsProblem Cause & solution Link to base. Move Making/answering calls, Intercom Caller ID Recharge battery is Battery chargePower failure But Recharge Instructions to customer Service difficulties Technical information Handset Index Wall mounting Base unit 38 Charger TG2421AL2422ALe.book Page 50 Tuesday, March 15, 2005 629 PM TG2421AL2422ALe.book Page 51 Tuesday, March 15, 2005 629 PM Copyright Sales Department Panasonic Australia Pty. Limited Manufacturer